lhedrick's Discussions (325)

Discussions Replied To (307) Replies Latest Activity

"Something you might have missed. This is not just about boats. When you are done yo…"

lhedrick replied Nov 5, 2009 to What you get when you build a boat...

10 Nov 21, 2009
Reply by John Almberg

"I have never hit anything so it's still an experiment. I used the same type of foam…"

lhedrick replied Nov 3, 2009 to Building for big water and looking for options.

14 Nov 24, 2009
Reply by Randy Dersham

"Where is the complex part? The term "bullet proof" has never been mentioned. Where…"

lhedrick replied Nov 2, 2009 to Building for big water and looking for options.

14 Nov 24, 2009
Reply by Randy Dersham

"I hope to build my next boat out of all plascore. I will use wood for the gunwales,…"

lhedrick replied Nov 2, 2009 to Building for big water and looking for options.

14 Nov 24, 2009
Reply by Randy Dersham

"Jon, I am trying to get my head around a seam which can brake away. I'm not a kayak…"

lhedrick replied Nov 2, 2009 to Building for big water and looking for options.

14 Nov 24, 2009
Reply by Randy Dersham

"I would certainly recommend bulkheads just to contain water to one compartment when…"

lhedrick replied Nov 1, 2009 to Building for big water and looking for options.

14 Nov 24, 2009
Reply by Randy Dersham

"You are right on the mark. I have seen a bottom punch through right next to a bulkhe…"

lhedrick replied Oct 27, 2009 to Whitewater Dory Builders...Bulk heads good or bad?

8 May 17, 2019
Reply by Phil Mann

"Randy, Thanks for the reply. On the subject of 3M5200. I have a sit on top kayak ma…"

lhedrick replied Oct 25, 2009 to Polysulfide sealant

6 Oct 25, 2009
Reply by Dave Z

"The boats I build are all stitch and glue type with lots of epoxy/glass over the chi…"

lhedrick replied Oct 25, 2009 to Polysulfide sealant

6 Oct 25, 2009
Reply by Dave Z

"Karen Something I forgot to mention. Epoxy softens with heat. I have never tried th…"

lhedrick replied Oct 21, 2009 to Kevlar Tape

4 Oct 21, 2009
Reply by Karen Edwards

RSS

© 2024   Created by Randy Dersham.   Powered by

Badges  |  Report an Issue  |  Terms of Service