Randy Dersham's Discussions (571)

Search Forum

View

Discussions Replied To (537) Replies Latest Activity

"Below is the HomeDepot info on Sandeplywood.  I did not see if it was made as an ext…"

Randy Dersham replied Feb 3, 2011 to Sande marine plywood--any comments?

 15 Aug 7, 2020
Reply by John Dobbelaere

"You are right Justin.  The 5200 is more flexible than the epiphanies so will crack t…"

Randy Dersham replied Jan 26, 2011 to one man dory, gunnels are done!

 14 Jan 26, 2011
Reply by Randy Dersham

"Hmmmm, this is a problem. I always have the show on opening day of fishing season th…"

Randy Dersham replied Jan 24, 2011 to date on boat show?

 1 Jan 24, 2011
Reply by Randy Dersham

"http://linktech-inc.com/  is the website of the UHMW that you can bond.  It is a pat…"

Randy Dersham replied Jan 23, 2011 to Installing UHMW bottom

 20 Feb 16, 2011
Reply by Terry E Walsh

"When you screw down the plywood shoe use 3M 101 or other similar polysulfide bedding…"

Randy Dersham replied Jan 22, 2011 to bottom shoe

 8 Jan 23, 2011
Reply by Rick Newman

"ah, that last bit was a brain fart.  " The purpose isn't to make it (the shoe) last…"

Randy Dersham replied Jan 22, 2011 to bottom shoe

 8 Jan 23, 2011
Reply by Rick Newman

"Use a 1" screw and make sure to screw only along the chine or into a bottom frame.  …"

Randy Dersham replied Jan 22, 2011 to Installing UHMW bottom

 20 Feb 16, 2011
Reply by Terry E Walsh

"Peter I think you have it exactly right. Definitely remove the glassed over chine ba…"

Randy Dersham replied Jan 22, 2011 to bottom shoe

 8 Jan 23, 2011
Reply by Rick Newman

"Yes Don, that's critical. You should also have an engine blower. An active vent is r…"

Randy Dersham replied Jan 19, 2011 to Wooden Drifter/Jet - River Video

 20 Jan 20, 2011
Reply by Don Wakefield

"All of us would love to have you at the boat show.  Our only requirement is that the…"

Randy Dersham replied Jan 19, 2011 to Wooden Drifter/Jet - River Video

 20 Jan 20, 2011
Reply by Don Wakefield

RSS

© 2024   Created by Randy Dersham.   Powered by

Badges  |  Report an Issue  |  Terms of Service