Art Page's Discussions (40)

Search Forum

View

Discussions Replied To (37) Replies Latest Activity

"So I'm kinda dragging my feet on fully assembling the hull since I'll need to do thi…"

Art Page replied Oct 28, 2025 to 17-foot McKenzie drift boat

 45 Mar 25
Reply by David Witton

"These machined pulleys and small bracket will be used as part of the anchor system.…"

Art Page replied Oct 27, 2025 to 17-foot McKenzie drift boat

 45 Mar 25
Reply by David Witton

"Thanks David.  I'm thinking about mimicking some of the details you did on your boat…"

Art Page replied Oct 26, 2025 to 17-foot McKenzie drift boat

 45 Mar 25
Reply by David Witton

"I designed an anchor arm bracket that will mount in the center of the stern.  The pl…"

Art Page replied Oct 25, 2025 to 17-foot McKenzie drift boat

 45 Mar 25
Reply by David Witton

" In the meantime, I machined up a bow eye from 1/2" aluminum.... "

Art Page replied Oct 25, 2025 to 17-foot McKenzie drift boat

 45 Mar 25
Reply by David Witton

"The dry fit up/assembly revealed no surprises...it looks like a boat!  I then disass…"

Art Page replied Oct 25, 2025 to 17-foot McKenzie drift boat

 45 Mar 25
Reply by David Witton

"So at this point I have all the major parts for the boat "carcass" minus the bottom…"

Art Page replied Oct 23, 2025 to 17-foot McKenzie drift boat

 45 Mar 25
Reply by David Witton

"For the stern, I epoxy laminated 1/2 and 1/4 ply to get a 3/4" thick sheet....…"

Art Page replied Oct 23, 2025 to 17-foot McKenzie drift boat

 45 Mar 25
Reply by David Witton

" "

Art Page replied Oct 23, 2025 to 17-foot McKenzie drift boat

 45 Mar 25
Reply by David Witton

" Prepping and epoxying the hull panels.... "

Art Page replied Oct 23, 2025 to 17-foot McKenzie drift boat

 45 Mar 25
Reply by David Witton

RSS

© 2026   Created by Randy Dersham.   Powered by

Badges  |  Report an Issue  |  Terms of Service