Kevin C.'s Discussions (100)

Search Forum

View

Discussions Replied To (86) Replies Latest Activity

"my first thought was to remove the entire bottom ,replace the chines,lap joint a new…"

Kevin C. replied Mar 29, 2012 to Is there hope for this boat?

 7 Apr 2, 2012
Reply by Jon Darrohn

"the lower you put your eyebolt(or whatever) the easier it will be for the bowstem to…"

Kevin C. replied Mar 29, 2012 to Bow Eye/UHMW Oarlock Sleeves

 14 Apr 10, 2012
Reply by Randy Dersham

"oops ,meant 1/8" x 3/4" steel"

Kevin C. replied Mar 21, 2012 to UHMW Chine Caps?

 21 Mar 22, 2012
Reply by Jack Rose

"1/4"x 3/4" steel strips screwed into white oak or mahogany with silicone bronze scre…"

Kevin C. replied Mar 21, 2012 to UHMW Chine Caps?

 21 Mar 22, 2012
Reply by Jack Rose

"uumm,wondering why there is not a angle bevel on the inside of the frames to accomod…"

Kevin C. replied Mar 8, 2012 to Guy's Wooden Drift Boat Project

 1039 Nov 18, 2023
Reply by Guy Fredrickson

"Randy's got it...sounds like you're trying to use 5200 for an application it's not d…"

Kevin C. replied Mar 7, 2012 to 3m 5200.. info needed!

 16 Jun 27, 2012
Reply by Mark

"most hardware stores carry aquastrip,comes in a white plastic bucket"

Kevin C. replied Jan 14, 2012 to Removal of interior enamel

 4 Jan 14, 2012
Reply by Kevin C.

"Hey Ray,when we put chine logs in we carefully trim the transom end into a tight fit…"

Kevin C. replied Dec 1, 2011 to Installing new chines

 6 Dec 3, 2011
Reply by Randy Dersham

"perhaps you can cut out the affected area of rot with a skil saw all the way aong th…"

Kevin C. replied Jul 30, 2011 to rapid robert restoration question

 6 Aug 14, 2011
Reply by Stan Riedesel

"apply light heat with a heat gun to excess epoxy and use a good sharp scraper to rem…"

Kevin C. replied Jul 28, 2011 to First Boat! Many Questions

 15 Jul 29, 2011
Reply by Ron Bakken

RSS

© 2025   Created by Randy Dersham.   Powered by

Badges  |  Report an Issue  |  Terms of Service