tungsten's Discussions (373)

Search Forum

View

Discussions Replied To (367) Replies Latest Activity

"E glass is really good in tension,take a piece of ply wood put glass on one side the…"

tungsten replied Oct 21, 2016 to How much fiberglass on the bottom of a decked 16X48

 16 Oct 29, 2016
Reply by John Squire

"Do you mean 18 oz on outside and 2- 6oz on inside?If not then i would hold off on th…"

tungsten replied Oct 20, 2016 to How much fiberglass on the bottom of a decked 16X48

 16 Oct 29, 2016
Reply by John Squire

"Im building an out door kitchen under my patio,there will be a model of a drift boat…"

tungsten replied Oct 16, 2016 to Show of hands....

 27 Dec 26, 2016
Reply by Kyle Hryniw

"I would think frames and floor boards covered in epoxy then durabak would last quite…"

tungsten replied Oct 15, 2016 to Baker 17x54 build

 298 Feb 10
Reply by Bennett Yarbrough

"Stitch and glue boats are normally covered with glass,floor and up the sides.So this…"

tungsten replied Oct 15, 2016 to Baker 17x54 build

 298 Feb 10
Reply by Bennett Yarbrough

"I agree with Eric,the old plywood will be like a sponge.Coat first with neat epoxy l…"

tungsten replied Oct 14, 2016 to EZ Fillet and Epoxy

 3 Oct 16, 2016
Reply by John Squire

"Drift boats take a lot of abuse,stick with the 4- 6 oz, for just a small weight pena…"

tungsten replied Sep 3, 2016 to Baker 17x54 build

 298 Feb 10
Reply by Bennett Yarbrough

"I seem to remember something about 7 days,of course pending on temp. You'll want it…"

tungsten replied Aug 18, 2016 to Varnish over epoxy

 4 Aug 20, 2016
Reply by Mike Baker

"Dont forget the bubble buster roller,this helps to get the glass fully wet out the f…"

tungsten replied Aug 16, 2016 to Best way to strenghten bottom of 16ft. Don Hill DB

 16 Aug 16, 2016
Reply by AJ DeRosa

"In your case James 2 layers of 12 oz or one 18oz over 3/8 ply is pretty durable.Extr…"

tungsten replied Aug 14, 2016 to Best way to strenghten bottom of 16ft. Don Hill DB

 16 Aug 16, 2016
Reply by AJ DeRosa

RSS

© 2025   Created by Randy Dersham.   Powered by

Badges  |  Report an Issue  |  Terms of Service