Phillip Westendorf's Discussions (644)

Discussions Replied To (638) Replies Latest Activity

"Today the boat left the garage on the trailer.  Here's a pic with the new cover I pu…"

Phillip Westendorf replied Dec 15, 2013 to Dorf's Wooden Drift Boat

333 Jul 9, 2020
Reply by Phillip Westendorf

"Rick, I spent the better part of ten years humped over a drawing board in the 60's &…"

Phillip Westendorf replied Dec 9, 2013 to Dorf's Wooden Drift Boat

333 Jul 9, 2020
Reply by Phillip Westendorf

"I revisited the height issue based upon the several comments above and lowered the s…"

Phillip Westendorf replied Dec 9, 2013 to Dorf's Wooden Drift Boat

333 Jul 9, 2020
Reply by Phillip Westendorf

"Hey guys thanks for all your input.  Being a rookie at this boat design stuff, what…"

Phillip Westendorf replied Dec 8, 2013 to Dorf's Wooden Drift Boat

333 Jul 9, 2020
Reply by Phillip Westendorf

"Rick/Tungsten, Thanks for the input.  I based the height from the bottom at 23" high…"

Phillip Westendorf replied Dec 7, 2013 to Dorf's Wooden Drift Boat

333 Jul 9, 2020
Reply by Phillip Westendorf

"Also, In the past week I built a 10 ft. Long Router lathe and started to turn the sh…"

Phillip Westendorf replied Dec 6, 2013 to Dorf's Wooden Drift Boat

333 Jul 9, 2020
Reply by Phillip Westendorf

"I have made some progress these last couple of weeks, here's a rundown on what has b…"

Phillip Westendorf replied Dec 6, 2013 to Dorf's Wooden Drift Boat

333 Jul 9, 2020
Reply by Phillip Westendorf

"austin, Here's another option for a table saw scarfing jig. http://westcoastwoodenbo…"

Phillip Westendorf replied Nov 27, 2013 to Scarfing gunwales

14 Nov 29, 2013
Reply by Richard Elder

"Mike, If you look on Utube you can find a couple of Oar Lathes that use a router.  F…"

Phillip Westendorf replied Nov 25, 2013 to making oars

13 Dec 10, 2013
Reply by Mike Balch

"Eric, Thanks for the information. Dorf"

Phillip Westendorf replied Nov 22, 2013 to Dorf's Wooden Drift Boat

333 Jul 9, 2020
Reply by Phillip Westendorf

RSS

© 2024   Created by Randy Dersham.   Powered by

Badges  |  Report an Issue  |  Terms of Service