Kevin C.'s Discussions (100)

Search Forum

View

Discussions Replied To (86) Replies Latest Activity

"Pictures of the boat with closeups would be very helpful.Painting it will only postp…"

Kevin C. replied Mar 7, 2011 to Older boat upkeep

 6 Mar 8, 2011
Reply by Dave Z

"oops,Dave is correct on the nail size ...I was thinking screw sizes and writing abou…"

Kevin C. replied Mar 5, 2011 to Screw Distance

 26 Mar 19, 2011
Reply by chris towles

"thats correct,send the nail home with a broad nail set or a ball peen hammer with ac…"

Kevin C. replied Mar 5, 2011 to Screw Distance

 26 Mar 19, 2011
Reply by chris towles

"dry fit everything and mark where your frames meet the side panels,wet with epxy and…"

Kevin C. replied Mar 5, 2011 to Screw Distance

 26 Mar 19, 2011
Reply by chris towles

"Ben ,don't worry too much about this...it's your first build and these things happen…"

Kevin C. replied Mar 3, 2011 to HELP! with bad scarfs

 5 Mar 5, 2011
Reply by Dave Z

"Ben, no need to tip the boat .Wet out the wood with epoxy,roll on your glass from on…"

Kevin C. replied Mar 1, 2011 to Screws through Fiberglass

 17 Mar 3, 2011
Reply by lhedrick

"not quite sure why you wouldn't attach your decks to the interior frames but seems t…"

Kevin C. replied Mar 1, 2011 to Screws through Fiberglass

 17 Mar 3, 2011
Reply by lhedrick

"once your epoxy has cured on your scarf joint put a little heat from a heat gun to i…"

Kevin C. replied Feb 25, 2011 to Epoxy

 7 Feb 26, 2011
Reply by Ben Kittell

"...beauty over function..."

Kevin C. replied Feb 16, 2011 to Wood

 17 Feb 17, 2011
Reply by Sandy Pittendrigh

"make sure you take the cut nice and slow and watch out the scrap piece doesnt get ja…"

Kevin C. replied Feb 15, 2011 to Scarfing chine logs, rails, etc.

 11 Feb 18, 2011
Reply by Eric Loudenslager

RSS

© 2024   Created by Randy Dersham.   Powered by

Badges  |  Report an Issue  |  Terms of Service