Guy Fredrickson's Discussions (812)

Discussions Replied To (810) Replies Latest Activity

"Phil, Thanks for the advice.  I took the afternoon off, came home, and started worki…"

Guy Fredrickson replied Jun 19, 2012 to Guy's Wooden Drift Boat Project

1039 Nov 18, 2023
Reply by Guy Fredrickson

"Good point.  I can start the wet-out coat first thing in the morning while it's stil…"

Guy Fredrickson replied Jun 18, 2012 to Guy's Wooden Drift Boat Project

1039 Nov 18, 2023
Reply by Guy Fredrickson

"The epoxy dried faster than I expected, so I was able to get more accomplished this…"

Guy Fredrickson replied Jun 17, 2012 to Guy's Wooden Drift Boat Project

1039 Nov 18, 2023
Reply by Guy Fredrickson

"This picture shows the second side panel with the wet-out coat and four addtional co…"

Guy Fredrickson replied Jun 16, 2012 to Guy's Wooden Drift Boat Project

1039 Nov 18, 2023
Reply by Guy Fredrickson

"I just applied the wet-out coat to the second side panel. "

Guy Fredrickson replied Jun 15, 2012 to Guy's Wooden Drift Boat Project

1039 Nov 18, 2023
Reply by Guy Fredrickson

"Perhaps I now have a new plan.  Thanks Chris.  That's the great thing about this for…"

Guy Fredrickson replied Jun 15, 2012 to Guy's Wooden Drift Boat Project

1039 Nov 18, 2023
Reply by Guy Fredrickson

"Thanks Greg."

Guy Fredrickson replied Jun 14, 2012 to Guy's Wooden Drift Boat Project

1039 Nov 18, 2023
Reply by Guy Fredrickson

"Thanks Phillip."

Guy Fredrickson replied Jun 14, 2012 to Guy's Wooden Drift Boat Project

1039 Nov 18, 2023
Reply by Guy Fredrickson

"Tungsten, At first I thought that I would wrap the fiberglass cloth over the side an…"

Guy Fredrickson replied Jun 14, 2012 to Guy's Wooden Drift Boat Project

1039 Nov 18, 2023
Reply by Guy Fredrickson

"Not exciting work, but it has to be done. One side panel is ready for painting.  The…"

Guy Fredrickson replied Jun 13, 2012 to Guy's Wooden Drift Boat Project

1039 Nov 18, 2023
Reply by Guy Fredrickson

RSS

© 2024   Created by Randy Dersham.   Powered by

Badges  |  Report an Issue  |  Terms of Service