Guy Fredrickson's Discussions (812)

Search Forum

View

Discussions Replied To (810) Replies Latest Activity

"6 oz. for the inside surfaces of the side panels, bottom panels, and transom plate.…"

Guy Fredrickson replied Jun 2, 2012 to Guy's Wooden Drift Boat Project

 1039 Nov 18, 2023
Reply by Guy Fredrickson

"I did not expect the epoxy to cure well enough for sanding today, but it did.  Must…"

Guy Fredrickson replied Jun 2, 2012 to Guy's Wooden Drift Boat Project

 1039 Nov 18, 2023
Reply by Guy Fredrickson

"Slow and steady, Tom.  Slow and steady."

Guy Fredrickson replied Jun 2, 2012 to Guy's Wooden Drift Boat Project

 1039 Nov 18, 2023
Reply by Guy Fredrickson

"This shows the inside surfaces of the bottom panels after the initial wet-out of the…"

Guy Fredrickson replied Jun 1, 2012 to Guy's Wooden Drift Boat Project

 1039 Nov 18, 2023
Reply by Guy Fredrickson

"Tungsten, Is this the product? http://www.clcboats.com/shoptips/epoxy_and_fiberglass…"

Guy Fredrickson replied Jun 1, 2012 to Guy's Wooden Drift Boat Project

 1039 Nov 18, 2023
Reply by Guy Fredrickson

"Here I go again with fiberglassing.  These are the inside surfaces of the bottom pan…"

Guy Fredrickson replied Jun 1, 2012 to Guy's Wooden Drift Boat Project

 1039 Nov 18, 2023
Reply by Guy Fredrickson

"Thanks Tungsten."

Guy Fredrickson replied May 31, 2012 to Guy's Wooden Drift Boat Project

 1039 Nov 18, 2023
Reply by Guy Fredrickson

"I'm getting ready to fiberglass the inside surfaces of the bottom panels.  I'll star…"

Guy Fredrickson replied May 31, 2012 to Guy's Wooden Drift Boat Project

 1039 Nov 18, 2023
Reply by Guy Fredrickson

"I'm using the West System 410 Microlight Fairring Filler with 105 Resin and 207 Hard…"

Guy Fredrickson replied May 31, 2012 to Guy's Wooden Drift Boat Project

 1039 Nov 18, 2023
Reply by Guy Fredrickson

"I finished rough sanding the outside of the transom area and I laid the bottom panel…"

Guy Fredrickson replied May 30, 2012 to Guy's Wooden Drift Boat Project

 1039 Nov 18, 2023
Reply by Guy Fredrickson

RSS

© 2024   Created by Randy Dersham.   Powered by

Badges  |  Report an Issue  |  Terms of Service