Guy Fredrickson's Discussions (812)

Search Forum

View

Discussions Replied To (810) Replies Latest Activity

"Here are some pictures of the transom during dry fitting.  I drilled the holes for t…"

Guy Fredrickson replied May 19, 2012 to Guy's Wooden Drift Boat Project

 1039 Nov 18, 2023
Reply by Guy Fredrickson

"Today I did the final sanding of the chine logs and backer-board, dry fitted the bac…"

Guy Fredrickson replied May 18, 2012 to Guy's Wooden Drift Boat Project

 1039 Nov 18, 2023
Reply by Guy Fredrickson

"That a great old boat.  Please post plenty of pictures of the restoration."

Guy Fredrickson replied May 17, 2012 to New/Old boat

 7 Jun 6, 2012
Reply by AJ DeRosa

"That turned out to be a lot easier than I expected.  I was able to roll the boat by…"

Guy Fredrickson replied May 16, 2012 to Guy's Wooden Drift Boat Project

 1039 Nov 18, 2023
Reply by Guy Fredrickson

"I clamped the outer sheer rail to one of the side panels as extra support for rollin…"

Guy Fredrickson replied May 16, 2012 to Guy's Wooden Drift Boat Project

 1039 Nov 18, 2023
Reply by Guy Fredrickson

"Andres,  I hope to go to Patagonia one day.  There must be fantastic rivers and fish…"

Guy Fredrickson replied May 15, 2012 to Guy's Wooden Drift Boat Project

 1039 Nov 18, 2023
Reply by Guy Fredrickson

"Thanks Tungsten. Thanks Andres. Tonight I finished assembling the transom.  I will p…"

Guy Fredrickson replied May 15, 2012 to Guy's Wooden Drift Boat Project

 1039 Nov 18, 2023
Reply by Guy Fredrickson

"Thanks for the post Tungsten.  This is good to know."

Guy Fredrickson replied May 13, 2012 to plastic film over epoxy.

 18 May 16, 2012
Reply by tungsten

"A little more progress this weekend.  Here are photos of the inside and outside face…"

Guy Fredrickson replied May 13, 2012 to Guy's Wooden Drift Boat Project

 1039 Nov 18, 2023
Reply by Guy Fredrickson

"Phil, I'm using 6 oz. on the inside surfaces of the transom, side panels, and bottom…"

Guy Fredrickson replied May 11, 2012 to Guy's Wooden Drift Boat Project

 1039 Nov 18, 2023
Reply by Guy Fredrickson

RSS

© 2024   Created by Randy Dersham.   Powered by

Badges  |  Report an Issue  |  Terms of Service