Guy Fredrickson's Discussions (812)

Search Forum

View

Discussions Replied To (810) Replies Latest Activity

"Very nice Rick!  I think the only significant difference is that all of my frames sh…"

Guy Fredrickson replied Mar 9, 2012 to Guy's Wooden Drift Boat Project

 1039 Nov 18, 2023
Reply by Guy Fredrickson

"Dave, The frames are evenly spaced (1.063 ft) along the length of the boat. And her…"

Guy Fredrickson replied Mar 9, 2012 to Guy's Wooden Drift Boat Project

 1039 Nov 18, 2023
Reply by Guy Fredrickson

"Kevin, I decided to cut those bevels into the frames only at the locations of the tw…"

Guy Fredrickson replied Mar 8, 2012 to Guy's Wooden Drift Boat Project

 1039 Nov 18, 2023
Reply by Guy Fredrickson

"Here are some more pictures of the frames that may add some clarity.  In this set of…"

Guy Fredrickson replied Mar 8, 2012 to Guy's Wooden Drift Boat Project

 1039 Nov 18, 2023
Reply by Guy Fredrickson

"I finished the lion's share of the frames.  Here are some pictures.  I think it's in…"

Guy Fredrickson replied Mar 7, 2012 to Guy's Wooden Drift Boat Project

 1039 Nov 18, 2023
Reply by Guy Fredrickson

"This was a timely thread for me.  I was beginning to consider 3M 5200 for this very…"

Guy Fredrickson replied Mar 7, 2012 to 3m 5200.. info needed!

 16 Jun 27, 2012
Reply by Mark

"Thanks Andrew"

Guy Fredrickson replied Mar 5, 2012 to Guy's Wooden Drift Boat Project

 1039 Nov 18, 2023
Reply by Guy Fredrickson

"Thanks Greg.  Perhaps you can stop by this weekend.  I'll probably be working on and…"

Guy Fredrickson replied Mar 5, 2012 to Guy's Wooden Drift Boat Project

 1039 Nov 18, 2023
Reply by Guy Fredrickson

"I plan to use 1/4-20 carriage bolts.  After I cut the bevels on the bottom and sides…"

Guy Fredrickson replied Mar 5, 2012 to Guy's Wooden Drift Boat Project

 1039 Nov 18, 2023
Reply by Guy Fredrickson

"Here are some more pictures. This is the jig I showed earlier to hold the frames whi…"

Guy Fredrickson replied Mar 3, 2012 to Guy's Wooden Drift Boat Project

 1039 Nov 18, 2023
Reply by Guy Fredrickson

RSS

© 2024   Created by Randy Dersham.   Powered by

Badges  |  Report an Issue  |  Terms of Service