Jason Knight's Discussions (472)

Search Forum

View

Discussions Replied To (410) Replies Latest Activity

"Thanks! The subsequent flow coats of black epoxy did end up covering the screws. "

Jason Knight replied Jul 9, 2013 to Z's Drifter Pram

 62 Mar 9, 2017
Reply by Bennett Yarbrough

" Bottom is done. "

Jason Knight replied Jul 7, 2013 to Z's Drifter Pram

 62 Mar 9, 2017
Reply by Bennett Yarbrough

"Yeah it wasn't bad at all. I had the wheel from some other project and saw it sittin…"

Jason Knight replied Jul 6, 2013 to Fiberglass/Epoxy Question

 10 Jul 6, 2013
Reply by Jason Knight

"Transom(s) trim and chine caps are on. I also installed a drain plug this morning an…"

Jason Knight replied Jul 6, 2013 to Z's Drifter Pram

 62 Mar 9, 2017
Reply by Bennett Yarbrough

"So I used a paint and rust stripping wheel from 3M to scuff the surface of my wetted…"

Jason Knight replied Jul 6, 2013 to Fiberglass/Epoxy Question

 10 Jul 6, 2013
Reply by Jason Knight

"In hindsight that would have made the most sense. Lesson learned. I will need to do…"

Jason Knight replied Jul 3, 2013 to Fiberglass/Epoxy Question

 10 Jul 6, 2013
Reply by Jason Knight

"The saw blade is awesome. I used an 80 tooth finish blade for most of my cuts on the…"

Jason Knight replied Jul 2, 2013 to Z's Drifter Pram

 62 Mar 9, 2017
Reply by Bennett Yarbrough

"Thanks! The tape is to help with cleanup of the 5200 used to attach the bottom. "

Jason Knight replied Jul 2, 2013 to Z's Drifter Pram

 62 Mar 9, 2017
Reply by Bennett Yarbrough

"Thanks guys. I used my little block plane and a sanding block on the scarfs. Messed…"

Jason Knight replied Jul 2, 2013 to Z's Drifter Pram

 62 Mar 9, 2017
Reply by Bennett Yarbrough

"Thanks for the info guys.  I talked to Raka yesterday and they suggested scuffing th…"

Jason Knight replied Jul 2, 2013 to Fiberglass/Epoxy Question

 10 Jul 6, 2013
Reply by Jason Knight

RSS

© 2024   Created by Randy Dersham.   Powered by

Badges  |  Report an Issue  |  Terms of Service