tungsten's Discussions (370)

Search Forum

View

Discussions Replied To (364) Replies Latest Activity

"Wet sand between coats with maybe 320-500 grit then after the last coat work your wa…"

tungsten replied Nov 1, 2015 to Buffing out varinsh

 17 Nov 23, 2015
Reply by Al Strom

" Yes so much easier when you can glass the inside on a flat surface.They will still…"

tungsten replied Oct 28, 2015 to new to posting on site

 14 Nov 25, 2015
Reply by brett wolfe

"i would go with a mix say 5% wests 404 and 5% graphite.Or even something like 5% mil…"

tungsten replied Oct 20, 2015 to Drift Boat Project #3

 135 Jul 31, 2020
Reply by CWarmouth

"If you can remove the whole bottom then ya glass the inside before you replace. matt…"

tungsten replied Oct 16, 2015 to Drift Boat Project #3

 135 Jul 31, 2020
Reply by CWarmouth

"Don't think i would bother with any kevlar for the inside,it tends to absorb water s…"

tungsten replied Oct 15, 2015 to Drift Boat Project #3

 135 Jul 31, 2020
Reply by CWarmouth

"BB is quite heavy,i assume its marine grade or water resistant  anyway?You can boil…"

tungsten replied Oct 11, 2015 to Baltic Birch Aircraft Plywood?

 11 Dec 10, 2015
Reply by alan wernstrum

"Looks good Mike,A word of caution with the 12 oz biax,you can distort the weave very…"

tungsten replied Oct 3, 2015 to Mike`s Framed Drift Boat Build

 315 Jun 23, 2016
Reply by Mike Thomas

"I was timed out for an edit,also its that tear drop shape of the bottom that gives t…"

tungsten replied Sep 16, 2015 to Lofting side and bottom panels

 5 Sep 17, 2015
Reply by J. Snider

"I think a lot of it is trial an error,after building a few boats and 10 or so models…"

tungsten replied Sep 16, 2015 to Lofting side and bottom panels

 5 Sep 17, 2015
Reply by J. Snider

"Nice work! I cant remember what your plan is but if you wan't to wrap glass around t…"

tungsten replied Sep 14, 2015 to Mike`s Framed Drift Boat Build

 315 Jun 23, 2016
Reply by Mike Thomas

RSS

© 2025   Created by Randy Dersham.   Powered by

Badges  |  Report an Issue  |  Terms of Service