new to posting on site

im in the process of building the Bridges from Drift Boats and River Dories.ive got the sides cut and marked inside and out for the stations,the frames are made and beveled to specs.should i glass the inside of the sides and the frames before attaching the sides to the stem.any and all info would be much apreciated.will take pics soon

Views: 477

▶ Reply to This

Replies to This Discussion

Permalink Reply by brett wolfe on November 25, 2015 at 5:02pm

will be getting back to the boat in a few weeks,the white river in arkansas is calling and i've got the itch,dowels will be replacing the holes on all the braces.it's too bad wisconsin winters will keep me from doing any assembly but will be doing some homework.thanks again

Permalink Reply by David Witton on November 25, 2015 at 6:08am

Brad Dimock is in the process of building a Briggs inspired boat (new design). You might be interested in watching that over here.

RSS

© 2024   Created by Randy Dersham.   Powered by

Badges  |  Report an Issue  |  Terms of Service