brett wolfe's Discussions (15)

Discussions Replied To (12) Replies Latest Activity

"thanks for the input on the durable bottom finish,I'm just getting back into working…"

brett wolfe replied Apr 22, 2017 to Question/Opinion: Bottom protection

5 Apr 22, 2017
Reply by brett wolfe

"getting back to the boat building process.chine logs and bottom cut.did use 5200 to…"

brett wolfe replied Oct 18, 2016 to epoxy resin and 3m5200

6 Oct 18, 2016
Reply by brett wolfe

"can never have too many clamps"

brett wolfe replied Sep 15, 2016 to epoxy resin and 3m5200

6 Oct 18, 2016
Reply by brett wolfe

"thank you for the feedback.got the bottom cut out but forgot to build and install th…"

brett wolfe replied Sep 14, 2016 to epoxy resin and 3m5200

6 Oct 18, 2016
Reply by brett wolfe

"thanks Dave will try this,sounds a lot easier and cleaner than how i would have done…"

brett wolfe replied Jun 8, 2016 to bridges build

3 Jun 8, 2016
Reply by brett wolfe

"decided to use thickened epoxy and ring nails for the frames,as for the transom i wi…"

brett wolfe replied Jun 7, 2016 to bridges build

3 Jun 8, 2016
Reply by brett wolfe

"will be getting back to the boat in a few weeks,the white river in arkansas is calli…"

brett wolfe replied Nov 25, 2015 to new to posting on site

14 Nov 25, 2015
Reply by brett wolfe

"first hole went well but snapped cutter on second.now to extract the broken carnage…"

brett wolfe replied Nov 24, 2015 to new to posting on site

14 Nov 25, 2015
Reply by brett wolfe

"thanks for the feedback will try the heat,i did snap a couple off yesterday so for t…"

brett wolfe replied Nov 20, 2015 to new to posting on site

14 Nov 25, 2015
Reply by brett wolfe

"decided not to glass but just wet out the inside.new problem is i used stainless scr…"

brett wolfe replied Nov 20, 2015 to new to posting on site

14 Nov 25, 2015
Reply by brett wolfe

RSS

© 2019   Created by Randy Dersham.   Powered by

Badges  |  Report an Issue  |  Terms of Service