Roger Rippy's Discussions (26)

Search Forum

View

Discussions Replied To (21) Replies Latest Activity

"It has been 6 months or so since I posted a blog about fixing up the wooden drift bo…"

Roger Rippy replied Sep 30, 2012 to Beginning work on my new boat - 1994 Drifter built by Stuart Williams

 22 Sep 30, 2012
Reply by Fly Guys (Riverdriver)

"Thanks to everyone who replied; I certainly appreciate the information and some of t…"

Roger Rippy replied Feb 12, 2012 to Spare oar?

 9 Feb 12, 2012
Reply by Jason Knight

"Thanks Pete in Maine. I still working to get the DB off; because of my work schedule…"

Roger Rippy replied Jan 12, 2012 to Durback removal

 13 Jan 12, 2012
Reply by Roger Rippy

"Well lhedrick, you have good points. The more that I look at this stuff, the more I…"

Roger Rippy replied Jan 8, 2012 to Durback removal

 13 Jan 12, 2012
Reply by Roger Rippy

"So Terry, do you think the heat gun and a scraper is a better way to go than just sa…"

Roger Rippy replied Jan 5, 2012 to Durback removal

 13 Jan 12, 2012
Reply by Roger Rippy

"Dave, There are no frames to sand around; straight plywood glue & stitch. I am n…"

Roger Rippy replied Jan 3, 2012 to Durback removal

 13 Jan 12, 2012
Reply by Roger Rippy

"Thanks Chris and Eric for the feedback on this. I  went over to Home Depot earlier t…"

Roger Rippy replied Jan 2, 2012 to Durback removal

 13 Jan 12, 2012
Reply by Roger Rippy

"Thanks again Randy for the timely advice. Durabak UV 18 it is! Most of inside floor…"

Roger Rippy replied Dec 11, 2011 to Fiberglass deck?

 3 Dec 12, 2011
Reply by Randy Dersham

"Thanks Brad for the feedback on this. I will give the Composite Pro 2090 a try for t…"

Roger Rippy replied Dec 10, 2011 to Resin Research 2040

 14 Dec 12, 2011
Reply by Brad Dimock

"Thanks Brad for the information and the connection to the web site for this product.…"

Roger Rippy replied Dec 10, 2011 to Resin Research 2040

 14 Dec 12, 2011
Reply by Brad Dimock

RSS

© 2024   Created by Randy Dersham.   Powered by

Badges  |  Report an Issue  |  Terms of Service