Lawrence E. Long's Discussions (60)

Search Forum

View

Discussions Replied To (59) Replies Latest Activity

"Cris: I haved used Hydrotec for 4 canoes and a peapod. From 4mm to 12mm. All high qu…"

Lawrence E. Long replied Aug 14, 2009 to Hydrotek?

 6 Aug 14, 2009
Reply by Chris King

"Jason of Montana Boatworks(much experince building and repairing all manner of small…"

Lawrence E. Long replied Jun 4, 2009 to Bottom repair line-x

 19 Aug 1, 2010
Reply by Joseph Podesta

"Jason: There really is no "standard" but at a minimum I would say 6. What are the pa…"

Lawrence E. Long replied May 18, 2009 to Varnish Question

 5 May 18, 2009
Reply by Jason Knight

"Dave: Good to know it can happen. You learn something every day. I suppose the guys…"

Lawrence E. Long replied May 13, 2009 to Oarlocks

 12 May 14, 2009
Reply by Rick Newman

"sometimes a bronze oarlock is nice if you have to "spring" it open or closed to get…"

Lawrence E. Long replied May 12, 2009 to Oarlocks

 12 May 14, 2009
Reply by Rick Newman

"How did you get a monster pile of cypress to PA? Its far away from its growing range…"

Lawrence E. Long replied May 8, 2009 to cypress

 4 May 8, 2009
Reply by Dave Z

"If its only a few small spots, let the hull cure untill its really hard- . Blush is…"

Lawrence E. Long replied May 3, 2009 to Epoxy Blush and sanding

 1 May 3, 2009
Reply by Lawrence E. Long

"Bryan: Dave Z's comments on scarfs are right on the mark- location ,etc.When you mak…"

Lawrence E. Long replied May 3, 2009 to Railing for 18' drift boat

 8 May 3, 2009
Reply by Lawrence E. Long

"Brian- don't use any mple on a boat- very poor rotresistance and can stain easily wi…"

Lawrence E. Long replied May 2, 2009 to Railing for 18' drift boat

 8 May 3, 2009
Reply by Lawrence E. Long

RSS

© 2024   Created by Randy Dersham.   Powered by

Badges  |  Report an Issue  |  Terms of Service