Dan Hooper's Discussions (42)

Search Forum

View

Discussions Replied To (41) Replies Latest Activity

"Mark, I would leave it alone.  It shows some of the history of the boat. "

Dan Hooper replied Dec 17, 2014 to Any ideas?

 9 Jan 11, 2015
Reply by Richard

"I made my own.  3" aluminum angle & pulley from hardware store."

Dan Hooper replied Oct 22, 2014 to Anchor systems

 4 Oct 22, 2014
Reply by Chris Anderson

"I used Raptor bed liner on the interior of my boat.  I'm very pleased with it.  I us…"

Dan Hooper replied Apr 11, 2014 to Truck Bed Liner for Bottom

 11 Apr 18, 2014
Reply by scott goddard

"I used Raptor bed liner on my boat.  I rolled it on after the epoxy had cured."

Dan Hooper replied Mar 17, 2014 to Truck bed liner over epoxy

 4 Mar 17, 2014
Reply by Jonathan Clarke

"I'd be interested, depending on the date.  It's about a 7 hour drive from my house i…"

Dan Hooper replied Jan 25, 2014 to Wooden Boat Festival in Riggins

 13 Mar 26, 2014
Reply by Joel Sauder

"Dutch, what did you use to bed your new stem?  Mine is ready to go back on & I h…"

Dan Hooper replied Nov 16, 2013 to Crenshaw Restore.

 27 Nov 24, 2013
Reply by Adam "Dutch" Gottschling

"Dutch, I have a question.  What did you bed the stem with when you replaced it?  Did…"

Dan Hooper replied Nov 14, 2013 to Crenshaw Restore.

 27 Nov 24, 2013
Reply by Adam "Dutch" Gottschling

"Mark, I had to do 3 to 4 coats of Citristrip to get down to the wood.  I found that…"

Dan Hooper replied Jul 28, 2013 to Mckenzie rebuild

 18 Jul 28, 2013
Reply by Dan Hooper

"Thanks Rick.  Yes it has been a lot of elbow grease, scrapping & sanding."

Dan Hooper replied Jul 28, 2013 to Mckenzie rebuild

 18 Jul 28, 2013
Reply by Dan Hooper

"I thought I'd show some progress on the old woody.  It's been a slower progress than…"

Dan Hooper replied Jul 28, 2013 to Mckenzie rebuild

 18 Jul 28, 2013
Reply by Dan Hooper

RSS

© 2024   Created by Randy Dersham.   Powered by

Badges  |  Report an Issue  |  Terms of Service