Eric Loudenslager's Discussions (127)

Search Forum

View

Discussions Replied To (125) Replies Latest Activity

"I use 10:1 on dimensional wood used for gunnels.  I cut a rough scarf on a table saw…"

Eric Loudenslager replied Feb 15, 2011 to Scarfing chine logs, rails, etc.

 11 Feb 18, 2011
Reply by Eric Loudenslager

"From the plans in Roger's book it is not easy to determine the actual bottom panel l…"

Eric Loudenslager replied Feb 8, 2011 to BottOm Pannel

 12 Feb 14, 2011
Reply by lhedrick

"Check the blogs and post from Brad Dimock and Kelly Nue (aka Ukulady) on this site.…"

Eric Loudenslager replied Feb 5, 2011 to Another Newbie Needs Advice

 20 Feb 5, 2011
Reply by Ben Kittell

"Check out Justin Crump's posts to the Wood Sled thread.  He built the Rogue Runner a…"

Eric Loudenslager replied Dec 28, 2010 to Wood Sled #2

 7 Dec 30, 2010
Reply by Jordan Davis

"You may want to check out Rebecca Wittman's "The brightwork companion" for ideas abo…"

Eric Loudenslager replied Dec 17, 2010 to Wooden Boat Repairs

 14 Dec 17, 2010
Reply by Eric Loudenslager

"Titebond (PVA) glues are usually not recommended for bent-lamination construction in…"

Eric Loudenslager replied Dec 15, 2010 to An interesting article about glues

 8 Dec 15, 2010
Reply by Eric Loudenslager

"It must be the season! November 19, 2008 there was a thread on the Montana-Riverboat…"

Eric Loudenslager replied Nov 21, 2010 to 17' Chinook Progress w/Pics!

 21 Nov 23, 2010
Reply by Jordan Davis

"Stainless fasteners should not be plugged or completely sealed. They need to be expo…"

Eric Loudenslager replied Nov 20, 2010 to 17' Chinook Progress w/Pics!

 21 Nov 23, 2010
Reply by Jordan Davis

"Practice, then practice some more. Scarf some 1/4 inch lath, then practice on 1/4 sc…"

Eric Loudenslager replied Nov 18, 2010 to Scarfing plywood...

 12 Dec 17, 2010
Reply by wade radina

"Many of the stitch-and-glue dories have dry (in reality damp) storage, and then ther…"

Eric Loudenslager replied Sep 16, 2010 to Dry Storage

 10 Sep 24, 2010
Reply by Terry E Walsh

RSS

© 2024   Created by Randy Dersham.   Powered by

Badges  |  Report an Issue  |  Terms of Service