tungsten's Discussions (370)

Search Forum

View

Discussions Replied To (364) Replies Latest Activity

"I would think frames and floor boards covered in epoxy then durabak would last quite…"

tungsten replied Oct 15, 2016 to Baker 17x54 build

 295 Oct 1, 2023
Reply by Bennett Yarbrough

"Stitch and glue boats are normally covered with glass,floor and up the sides.So this…"

tungsten replied Oct 15, 2016 to Baker 17x54 build

 295 Oct 1, 2023
Reply by Bennett Yarbrough

"I agree with Eric,the old plywood will be like a sponge.Coat first with neat epoxy l…"

tungsten replied Oct 14, 2016 to EZ Fillet and Epoxy

 3 Oct 16, 2016
Reply by John Squire

"Drift boats take a lot of abuse,stick with the 4- 6 oz, for just a small weight pena…"

tungsten replied Sep 3, 2016 to Baker 17x54 build

 295 Oct 1, 2023
Reply by Bennett Yarbrough

"I seem to remember something about 7 days,of course pending on temp. You'll want it…"

tungsten replied Aug 18, 2016 to Varnish over epoxy

 4 Aug 20, 2016
Reply by Mike Baker

"Dont forget the bubble buster roller,this helps to get the glass fully wet out the f…"

tungsten replied Aug 16, 2016 to Best way to strenghten bottom of 16ft. Don Hill DB

 16 Aug 16, 2016
Reply by AJ DeRosa

"In your case James 2 layers of 12 oz or one 18oz over 3/8 ply is pretty durable.Extr…"

tungsten replied Aug 14, 2016 to Best way to strenghten bottom of 16ft. Don Hill DB

 16 Aug 16, 2016
Reply by AJ DeRosa

"One thing you don't see in cored boats is large pieces of plywood epoxied to it so y…"

tungsten replied Aug 14, 2016 to Best way to strenghten bottom of 16ft. Don Hill DB

 16 Aug 16, 2016
Reply by AJ DeRosa

"I agree,should be fine as long as the glue up goes well.Don't       over weight / cl…"

tungsten replied Aug 4, 2016 to "Will this scarf hold?" (I know, I know, but gotta ask)

 3 Aug 4, 2016
Reply by tungsten

"Not sure if you really need to do it but the only way to tell for sure is grind out…"

tungsten replied Jul 30, 2016 to Fiberglass Creep

 10 Aug 12, 2016
Reply by James Prepura

RSS

© 2024   Created by Randy Dersham.   Powered by

Badges  |  Report an Issue  |  Terms of Service