Andrew's Discussions (109)

Search Forum

View

Discussions Replied To (95) Replies Latest Activity

"I have done it before all in one step with a slow hardener and there was enough time…"

Andrew replied May 15, 2012 to plastic film over epoxy.

 18 May 16, 2012
Reply by tungsten

"So is this the process you used?  1.Roll on coat of epoxy 2. Lay fabric 3. Fill weav…"

Andrew replied May 15, 2012 to plastic film over epoxy.

 18 May 16, 2012
Reply by tungsten

"The material is called PetG.  It is the same material that they make pop bottles out…"

Andrew replied May 15, 2012 to plastic film over epoxy.

 18 May 16, 2012
Reply by tungsten

"Very nice looking joint.  If I ever do another boat that will be the way to go.  An…"

Andrew replied May 3, 2012 to A half wooden boat

 2 May 3, 2012
Reply by Andrew

"I'm going to put this over in the blogs so if the mods want to delete it please go a…"

Andrew replied May 1, 2012 to New Rescue Dog/Boat

 4 May 1, 2012
Reply by Andrew

"I got after that pesky bed liner that the previous owner used on the sides.  20 sand…"

Andrew replied Apr 30, 2012 to New Rescue Dog/Boat

 4 May 1, 2012
Reply by Andrew

"Thanks for that.   After taking a little more time here I looked and I think I have…"

Andrew replied Apr 30, 2012 to Oil on various boat parts

 2 Apr 30, 2012
Reply by Andrew

"Started working with my son last night.  Sawzall and a 5yo makes for short work of t…"

Andrew replied Apr 26, 2012 to New Rescue Dog/Boat

 4 May 1, 2012
Reply by Andrew

"I have used both 0.030" and 0.020" PETg 4'x8' sheets which I cut down to 2' width. T…"

Andrew replied Apr 1, 2012 to Guy's Wooden Drift Boat Project

 1039 Nov 18, 2023
Reply by Guy Fredrickson

"An Tungsten mentioned I used the "peel ply" technique in the first link, I am very p…"

Andrew replied Mar 30, 2012 to Guy's Wooden Drift Boat Project

 1039 Nov 18, 2023
Reply by Guy Fredrickson

RSS

© 2024   Created by Randy Dersham.   Powered by

Badges  |  Report an Issue  |  Terms of Service