This will be heavily glassed and painted on both sides, not worried about for checking

which is better for stiffness and strength as a floor core material?

Views: 214

Reply to This

Replies to This Discussion

That's awesome David. I'll bet it also helps keep the curve of the rocker fair. It's so hard to bend the end of a board.

Yet another trick to bending the bottom is to attach it at the bow with the rear supported in the air with ropes or something. Then you have 16 or so feet of bottom to use as weight as you lower it down.

RSS

© 2018   Created by Randy Dersham.   Powered by

Badges  |  Report an Issue  |  Terms of Service