Roger Fletcher's drawings for the 16' double-ender with transom calls for the transom to be 3/4" plywood. Is there any reason it would not be acceptable to laminate 3 layers of 1/4" plywood using epoxy?

Views: 355

Reply to This

Replies to This Discussion

Hey Dobie,

Perfectly acceptable. 1/2" + 1/4" would work also>

Mike

Thanks for the reply.

No problem at all- this is the way Jason Cajune makes his curved transoms

RSS

© 2024   Created by Randy Dersham.   Powered by

Badges  |  Report an Issue  |  Terms of Service