Transom question

Roger Fletcher's drawings for the 16' double-ender with transom calls for the transom to be 3/4" plywood. Is there any reason it would not be acceptable to laminate 3 layers of 1/4" plywood using epoxy?

Views: 354

▶ Reply to This

Replies to This Discussion

Permalink Reply by Mike Baker on February 19, 2015 at 10:09am

Hey Dobie,

Perfectly acceptable. 1/2" + 1/4" would work also>

Mike

Permalink Reply by Dobie Swift on February 19, 2015 at 10:39am

Thanks for the reply.

Permalink Reply by Lawrence E. Long on February 19, 2015 at 6:10pm

No problem at all- this is the way Jason Cajune makes his curved transoms

RSS

© 2024   Created by Randy Dersham.   Powered by

Badges  |  Report an Issue  |  Terms of Service