Wood finish, LVT

I am going to try to stop/slow the mildew growth on the ribs in my boat with the LVT mixture someone suggested. Is the correct recipe equal parts linseed oil/varnish/turpentine with Japan dryer as directed on the can?

Views: 271

▶ Reply to This

Replies to This Discussion

Permalink Reply by Mark Stuberr on January 22, 2015 at 10:11am

http://shoelessmusings.blogspot.com/search?q=boat+sauce

John,

This sounds a lot like boat sauce. If you go to the link above and look through the pictures there is a recipe for boat sauce that may help.

Permalink Reply by John Ahlbin on January 23, 2015 at 8:25am

Teak oil is what brought me to change up my finish. Watco Teak oil grew mildew on the ribs of my 16' Don Hill design drift boat. I applied 2 coats of Watco Teak oil to all of the ribs and now that the weather has cooled mildew is growing on the ribs. The boat is stored uncovered inside a 2 car garage with no doors. So, after a suggestion by someone on this site who referred to LVT I turned to Google. What I came up with was equal parts (I chose by weight - 13 ounces each) boiled linseed oil/Cobalt varnish/turpentine with a splash of Japan dryer. I applied 2 coats and let them dry for about 20 minutes and wiped off the excess. The finish has dried and it looks great so now we will see if it stops the mildew.

RSS

© 2024   Created by Randy Dersham.   Powered by

Badges  |  Report an Issue  |  Terms of Service