Mark Stuberr's Discussions (63)

Search Forum

View

Discussions Replied To (52) Replies Latest Activity

"Pete Culler oars are great, plus you can modify the design to get exactly what you w…"

Mark Stuberr replied Jun 10, 2016 to Briggs Grand Canyon Dory OAR LENGTH

 8 Jul 25, 2016
Reply by Mike Morris

"http://shoelessmusings.blogspot.com/2013/03/an-irh-weekend.html"

Mark Stuberr replied May 27, 2016 to transom material

 10 May 27, 2016
Reply by Mark Stuberr

"I would use a hardwood. I have used plywood but only due to financial reasons. You c…"

Mark Stuberr replied May 27, 2016 to transom material

 10 May 27, 2016
Reply by Mark Stuberr

"Just to toss in my two cents. You can use the measurement from the bottom of the boa…"

Mark Stuberr replied May 27, 2016 to Rower seat height?

 6 May 27, 2016
Reply by Mark Stuberr

"You should also check out the Scamp. I have messed around with the Pocket Ship and t…"

Mark Stuberr replied May 27, 2016 to Need help with decision

 2 May 27, 2016
Reply by Mark Stuberr

"I really like Le Tonkinois. I cut it with 20-30% Turp for the first few coats then s…"

Mark Stuberr replied May 27, 2016 to Varnish

 2 May 27, 2016
Reply by Mark Stuberr

"The goal is to get the energy from a impact to spread across the bottom panel into i…"

Mark Stuberr replied Apr 14, 2016 to Frame Types

 6 Apr 15, 2016
Reply by David Witton

"There is a fairly long history of traditional boats built without the bottom of the…"

Mark Stuberr replied Apr 14, 2016 to Frame Types

 6 Apr 15, 2016
Reply by David Witton

"I agree that the hull can be stabilized through bracing and then worked on without a…"

Mark Stuberr replied Apr 13, 2016 to No-ribs all plywood no-fiberglass no-epoxy no-glue boat

 12 Apr 13, 2016
Reply by Sandy Pittendrigh

"Sandy, I have also been thinking along these lines. Its a constant debate in my head…"

Mark Stuberr replied Apr 13, 2016 to No-ribs all plywood no-fiberglass no-epoxy no-glue boat

 12 Apr 13, 2016
Reply by Sandy Pittendrigh

RSS

© 2024   Created by Randy Dersham.   Powered by

Badges  |  Report an Issue  |  Terms of Service