Wooden Boat People
By McKenzieDriftBoat.com
Forum Discussions (2,013)
| Discussions | Replies | Latest Activity |
|---|---|---|
Plans for framed pramCan anyone recommend a set of plans for an 8' or 10' framed constructed lake pram? All of the plans that I find are for stich & glue. A… Started by John Woodward in General Forum |
2 |
Feb 1, 2016 Reply by John Woodward |
Launching a DB down a steep hillMy drift boat trailer has a roller to aid in launching and recovering the boat from a standard launch site. But here in Michigan, many of t… Started by Bill Craig in General Forum |
4 |
Feb 1, 2016 Reply by Clay W. |
Waterlox wood Finish PicturesHello Boat Builders, just a few pictures of a few pieces of different types of wood, with the product Marine Waterlox applied. Two coats of… Started by Dennis Santino in General Forum |
0 | Jan 31, 2016 |
Trying to find marine grade wood in the southeastI live in Alabama, near Birmingham, and I'm having trouble finding marine grade plywood for a decent price. So far it has been about $100 a… Started by Scott M. in General Forum |
16 |
Jan 31, 2016 Reply by Mel Buchanan |
AnchorsI need to get a new anchor for my drifter. Looking for a 30lb. pyramid anchor. I'm in Georgia. Does anyone know of a supplier on the east c… Started by Rob Dussler in General Forum |
19 |
Jan 30, 2016 Reply by David Witton |
Interior FinishHello, Just getting started on the interior of my 15' Honky Dory. I was just wondering if anyone has used the product WATERLOX? I would be… Started by Dennis Santino in General Forum |
4 |
Jan 30, 2016 Reply by Dennis Santino |
Epoxy mix pumpsHello wooden boat folks, I have started a wooden drift boat build and ran into (created) a problem I would like some advise on. I am using… Started by Eric Berry in General Forum |
16 |
Jan 23, 2016 Reply by chris towles |
scarfing chineshas anyone steam bent their chines after scarfing? I am bending .75"x2" white oak with great results but would like to scarf it to the leng… Started by dreu patterson in General Forum |
3 |
Jan 19, 2016 Reply by dreu patterson |
Chine Notch QuestionsHey All - We just started into a Briggs using Roger's plans. Got the frames together and I've got some questions about the chine notches.… Started by Drew A in General Forum |
4 |
Jan 18, 2016 Reply by Brad Dimock |
Teaching a McKenzie boatbuilding courseHi all, I've been going back to WoodenBoat School in Brooklin, Maine for about five years now, picking up amazing amounts of information an… Started by Brad Dimock in General Forum |
7 |
Jan 17, 2016 Reply by Brad Dimock |
© 2025 Created by Randy Dersham.
Powered by
