I wanted to do something to personalize my boat. (I had bought it used, simply because It was the right price. I had restored the interior, but I still wanted to add something just for the fun of it.) I came up with the idea of inlaying an animal into the bow.

After considering several things, I choose a dragonfly, as they frequent the rivers i run. I realize that a ram or bear would have been much more macho, but that simply isn't what i wanted. Besides, bears have never landed on my boat the way dragonflies often do.

 

First step was to decide on the exact size and shape. I chiseled a 3/16 deep hole the shape i decided on into bow. 

I wanted something colorful and on the bright side of the spectrum. Zebra wood for the head (the stripes added a lot) canary for the body and cocobolo for the wings. Cut, shaped, and sanded the body to the dimensions of the now existing hole in the bow. Once they were all dry fitted, and I was happy with the fit, I glued them in with uv resistant black caulking (in hopes that this would allow for slight movement and give years of maintenance-free use).

 

 The difficult steps were long behind me at this point. Sanding came next.

 

Here it is.

 

I really liked how it turned out, the contrast in colors was more than I initially intended, but once I was at this point I decided that a flashy colored dragonfly would be a great addition.

You can see one tiny corner between the body and lower left wing that was too fragile. It was knocked out accidentally while chiseling. Oh well.

 

 

 

 

Staining and varnish remained...

 

The colors were muted quite a bit. Which were my original intentions for the project. However, once I had it sanded, before staining, I really liked the contrasting colors.

 

I know...I flip and flop back and forth between what I want it to look like. 

 

 

 

 

 

 

 

 

Varnishing would end the project.

Finished. Over all, the project was very much enjoyed. (About 12 hours...ish of work) 

Views: 450

Comment

You need to be a member of Wooden Boat People to add comments!

Join Wooden Boat People

Comment by Dan Williams on December 22, 2011 at 8:47pm

It's these little details that make wooden boats so special!  Great job!

Comment by JAY STRUGNELL on November 26, 2011 at 6:59pm

very nice touch,thank you for sharing all you craftsman are raising the bar.

Comment by joe nielson on November 26, 2011 at 6:35pm

no coping saw. mostly because i don't own one.  I cut the body out with just a band saw. then fine tuned it on a belt sander and spindle sander. Once the wings were perfect, I cut them in half. This gave me the symmetry i wanted and cut my work time in half.

Comment by Rick Newman on November 26, 2011 at 8:48am

Your butterfly inlay looks great. Thanks for sharing the process. This is what make

Wooden Boat People's pages a great place. Did you cut you butterfly with a coping saw?

 

Rick Newman

Comment by Randy Dersham on November 25, 2011 at 5:00pm

Very fun and great looking.  Thanks for sharing.

© 2024   Created by Randy Dersham.   Powered by

Badges  |  Report an Issue  |  Terms of Service