Don Hill drift boat

I am putting together a Don Hill 16 ft. high side guide model drift boat and was wondering if any of you nice people who maybe have built a Don Hill drift boat would have a picture of the name plate that goes on the boat. I contacted the Don Hill web site and they said that the only way I was going to find one was to ask some very nice boaters who may have one. Thanks

Views: 470

▶ Reply to This

Replies to This Discussion

Permalink Reply by Don Hanson on February 10, 2013 at 1:48pm

   The one I restored, it was a simple brass plate screwed into the stem just above the line deck.  It was engraved like a trophy...in fact I bet that is where Hill had them done...about the width of the inner stem and maybe 2" tall...Nothing really fancy.

Permalink Reply by Brian King on February 10, 2013 at 8:16pm

Don, thanks for the info. This will help. I am in the process of assembling a 1972 Don Hill 16 ft. kit boat.

RSS

© 2024   Created by Randy Dersham.   Powered by

Badges  |  Report an Issue  |  Terms of Service