Sort by: View
Discussions | Replies | Latest Activity |
---|---|---|
Does epoxy add strength?Hey everyone, I've been lurking and reading on the forum for a while now and have gathered A TON of great information from you all. Also h… Started by Jeff Jennings in General Forum |
12 |
Apr 4, 2009 Reply by Herb Jacobsen |
I put a bar in my boat...After four seasons and many miles on the water, I knew something was missing. Maybe I should've put a bar in the boat when I built it - but… Started by Greg Hatten in General Forum |
19 |
Apr 3, 2009 Reply by Greg Hatten |
Another polyurethane questionI am looking to clear coat my boat. I have epoxied plywood side panels with west system. Only the bottom will have glass. Any advice on wha… Started by E. Landis in General Forum |
0 | Apr 2, 2009 |
2-part PolyHi I am thinking of spraying 2-part polyurethane over glass and epoxy, on the exterior of my boat. I like the color choices and cost of Clo… Started by Brian in General Forum |
1 |
Apr 2, 2009 Reply by Jon Carter |
Oil Interior QuestionHere is a quick question. If you are planning an oiled interior and a painted/varnished exterior - do you varnish the outer handrail - then… Started by Jason Knight in General Forum |
7 |
Apr 1, 2009 Reply by TJ Weiss |
Anybody know this boat design and what should I do for the repairs?Just purchased this boat, came from Oregon Coast near Lincoln City. Anybody know who might have made this 1984 era boat? Also you will see… Started by Rick Newman in General Forum |
18 |
Mar 31, 2009 Reply by Randy Dersham |
Getting rid of grooves before a final coat......After several layers of quick fair and primer, I have noticed some scratches/grooves in the sides. I think it is from applying quickfair wi… Started by Craig in General Forum |
4 |
Mar 30, 2009 Reply by Craig |
Bob Pritchett's doryAnyone running one like his final dory as in Roger's book (pg 75). I'm wondering how big of a motor? I think in the book they mention a 75l… Started by jb in General Forum |
3 |
Mar 30, 2009 Reply by jb |
To restore or replace an existing patch?I've done a ton of sanding on my restore and discovered today just how bad one particular section of my side panel is. I knew the previous… Started by Jeff Jennings in General Forum |
3 |
Mar 30, 2009 Reply by Jeff Jennings |
interior completed for nowthank you to everyone for your comments and help. I sanded her all out and in the end decided to use teak oil on it. She looks great, maybe… Started by Brad in General Forum |
4 |
Mar 30, 2009 Reply by Jason Knight |
© 2024 Created by Randy Dersham. Powered by