Sort by: View
Discussions | Replies | Latest Activity |
---|---|---|
DeeksRandy, You mentioned... last week I think, that you were in contact with the new distributor for Deeks. Any word on testing? And if all go… Started by Jesse Ronnow in General Forum |
11 |
Mar 20, 2009 Reply by Dave Z |
oar lenth?I'm building a 17' whitewater dory. What size oars should I build or buy. I'm on a very limited budget. Den in Portsmouth NH Started by Den in General Forum |
6 |
Mar 19, 2009 Reply by Mike Dearing |
Two questionsFirst question. I am going to install my rub strips. 3M and a few screws to fit them to the sides? Second question. I am using alaskan yel… Started by E. Landis in General Forum |
1 |
Mar 18, 2009 Reply by Randy Dersham |
Restoring life to dried out woodThe wood from the rowers area to front is definitely dried out and has some cracking, nothing to bad though. It has a gray tone it, in the… Started by Brad in General Forum |
2 |
Mar 18, 2009 Reply by Brad |
Floor BoardsI am to the point on my restore where I need to redo my floor boards. I have decided to use Cedar at a thickness of about 5/8" and a width… Started by Jesse Ronnow in General Forum |
24 |
Mar 18, 2009 Reply by Jesse Ronnow |
Stripping agentsWell, I bought some 3M Safest Strip for paint and varnish, but it doesn't really work on my boat. I let the 3M cure for 2 hours, and still… Started by Brad in General Forum |
4 |
Mar 16, 2009 Reply by Brad |
Stem/Transom, Screw QuestionOk - So on a painted boat is is commonplace to plug the screw holes on the stem and transom? I usually see the screw pattern and it looks n… Started by Jason Knight in General Forum |
16 |
Mar 16, 2009 Reply by Greg Hatten |
New blog post- hull assemblywatch my boat progress here: www.thtchronicles.blogspot.com Dave Started by Dave Z in General Forum |
5 |
Mar 16, 2009 Reply by Dave Z |
Hole in the boat@!@!Sorry that was mostly to get your attention. I dont have a hole in my boat persay, what I have is an I-bolt in the front where the two side… Started by Brad in General Forum |
3 |
Mar 16, 2009 Reply by Brad |
plastic bottomI'm planning on putting a 1/4 or even 1/8 inch of plastic as a second bottom. First to protect the wood bottom but even more inportantly to… Started by Den in General Forum |
2 |
Mar 16, 2009 Reply by Jason Knight |
© 2024 Created by Randy Dersham. Powered by