Wooden Boat People
By McKenzieDriftBoat.com
Forum Discussions (2,017)
| Discussions | Replies | Latest Activity |
|---|---|---|
Sanding interiorWell, it has come time to sand the old boat's interior (first time in my 4 years of ownership). Really only the fore section, and the rower… Started by Brad in General Forum |
2 |
Mar 10, 2009 Reply by Brad |
Install Ribs and Chines with 3M 5200?Are most of you guys screwing and gluing your ribs/chines into place? I just watched the video that came with my Don Hill plans and they ju… Started by E. Landis in General Forum |
3 |
Mar 9, 2009 Reply by Dave Z |
Bedding Bottom in 3M 5200Ok - so I getting close to putting the bottom on my boat. Got it rough cut last night and am hoping to get it screwed and glued in the next… Started by Jason Knight in General Forum |
14 |
Mar 9, 2009 Reply by Greg Hatten |
Interior OilsAs I have finally removed all the varnish from the inside of my boat, I have decided to oil the inside this go around. I have received some… Started by Jesse Ronnow in General Forum |
13 |
Mar 6, 2009 Reply by Roger Fletcher |
How to fill small gaps...I am sure this is rookie question. I just finished assembling my bow stem, 5 rib, and transom. After everything dried it appears there is… Started by E. Landis in General Forum |
6 |
Mar 6, 2009 Reply by E. Landis |
Epoxy in cold weatherI have been sealing the chines and various dings and blemishes with some Raka epoxy in my garage the past few nights. The temperature has b… Started by Craig in General Forum |
8 |
Mar 4, 2009 Reply by Jason Knight |
Paint is on the wayJust ordered some brightside paint thanks to some advice from members. The boat is going in my garage tonight and the sanding begins. I hav… Started by Robert Hawkins in General Forum |
8 |
Feb 28, 2009 Reply by Jesse Ronnow |
HelloI had no Idea this site existed until I was looking around for boat paint on the internet last night and came across wooden boat people. I… Started by Robert Hawkins in General Forum |
6 |
Feb 25, 2009 Reply by Robert Hawkins |
Samuel F Manning - and SusanThere is a wonderful piece in the latest issue of WoodenBoat magazine about my good friend, Sam Manning. The feature, beginning on page 40,… Started by Roger Fletcher in General Forum |
5 |
Feb 24, 2009 Reply by Brian |
My RestoreI have been working on restore my 16' Tatman this winter. I have put up some photos of how things are going so far. I guess restoring is no… Started by Jesse Ronnow in General Forum |
16 |
Feb 22, 2009 Reply by Randy Dersham |
© 2025 Created by Randy Dersham.
Powered by
