Forum Discussions (2,017)

Discussions Replies Latest Activity

Floor Boards

I am to the point on my restore where I need to redo my floor boards. I have decided to use Cedar at a thickness of about 5/8" and a width…

Started by Jesse Ronnow in General Forum

24 Mar 18, 2009
Reply by Jesse Ronnow

Stripping agents

Well, I bought some 3M Safest Strip for paint and varnish, but it doesn't really work on my boat. I let the 3M cure for 2 hours, and still…

Started by Brad in General Forum

4 Mar 16, 2009
Reply by Brad

Stem/Transom, Screw Question

Ok - So on a painted boat is is commonplace to plug the screw holes on the stem and transom? I usually see the screw pattern and it looks n…

Started by Jason Knight in General Forum

16 Mar 16, 2009
Reply by Greg Hatten

New blog post- hull assembly

watch my boat progress here: www.thtchronicles.blogspot.com Dave

Started by Dave Z in General Forum

5 Mar 16, 2009
Reply by Dave Z

Hole in the boat@!@!

Sorry that was mostly to get your attention. I dont have a hole in my boat persay, what I have is an I-bolt in the front where the two side…

Started by Brad in General Forum

3 Mar 16, 2009
Reply by Brad

plastic bottom

I'm planning on putting a 1/4 or even 1/8 inch of plastic as a second bottom. First to protect the wood bottom but even more inportantly to…

Started by Den in General Forum

2 Mar 16, 2009
Reply by Jason Knight

Fly Fishing Features...

Here's a couple of things I added to the boat to make it "fly fishin friendly"... hope you like them. I took a leather strap, glued velcro…

Started by Greg Hatten in General Forum

10 Mar 15, 2009
Reply by Greg Hatten

plastic bottom

I'm planning on putting a 1/4 or even 1/8 inch of plastic as a second bottom. First to protect the wood bottom but even more inportantly to…

Started by Den in General Forum

0 Mar 12, 2009

What are the personal "touches" you added to make your boat unique??

One of the best parts of attending the McKenzie River Wooden Boat Festival is looking at all the wooden boats and seeing the unique ways we…

Started by Greg Hatten in General Forum

11 Mar 11, 2009
Reply by sanderson

Port Ludlow Pram

Does anyone have a picture/ plans any info on these boats? Thanks, Tim

Started by Tim Ugaldea in General Forum

1 Mar 11, 2009
Reply by Randy Dersham

RSS

© 2025   Created by Randy Dersham.   Powered by

Badges  |  Report an Issue  |  Terms of Service