tungsten's Discussions (370)

Search Forum

View

Discussions Replied To (364) Replies Latest Activity

"http://www.boatdesign.net/forums/wooden-boat-building-restoration/a... do some sear…"

tungsten replied Sep 13, 2015 to Air Horn Issues, need advise

 4 Sep 13, 2015
Reply by tungsten

"Theres the mess also with the poly glue,foams out makes a mess and its on your hands…"

tungsten replied Aug 25, 2015 to adhesives for frames

 13 Sep 10, 2015
Reply by Phillip Westendorf

"Borrow your neighbors power planer , once you get close finish with belt sander."

tungsten replied Aug 10, 2015 to Rub Strip Removal

 14 Aug 12, 2015
Reply by CWarmouth

"Another option is to tilt your strong back so you can do each side at a time. A bit…"

tungsten replied Aug 9, 2015 to Mike`s Framed Drift Boat Build

 315 Jun 23, 2016
Reply by Mike Thomas

"If your looking for a bright finish then glass the sides before you attach to the fr…"

tungsten replied Aug 9, 2015 to Mike`s Framed Drift Boat Build

 315 Jun 23, 2016
Reply by Mike Thomas

"Careful with using felt pens on screw heads or anywhere on the wood,epoxy dissolves…"

tungsten replied Aug 3, 2015 to Mike`s Framed Drift Boat Build

 315 Jun 23, 2016
Reply by Mike Thomas

"Ketchup bottles for epoxy,they have a big opening.If your hardener is runny then a m…"

tungsten replied Aug 1, 2015 to 16' Double ender w/ transom

 181 Jul 26, 2021
Reply by David Witton

"Remember to wet both sides of the joint first, no pooling of epoxy,let dry, scuff sa…"

tungsten replied Jul 31, 2015 to 16' Double ender w/ transom

 181 Jul 26, 2021
Reply by David Witton

"Put the epoxy and hardener in squeeze bottles,this gives you good control of amounts…"

tungsten replied Jul 31, 2015 to 16' Double ender w/ transom

 181 Jul 26, 2021
Reply by David Witton

"Well if you believe the epoxy venders they say two coats of epoxy then glass.First c…"

tungsten replied Jul 30, 2015 to Mike`s Framed Drift Boat Build

 315 Jun 23, 2016
Reply by Mike Thomas

RSS

© 2025   Created by Randy Dersham.   Powered by

Badges  |  Report an Issue  |  Terms of Service