Rick Newman's Discussions (1,608)

Discussions Replied To (1577) Replies Latest Activity

"Ken, I think that you are correct about your boat swelling up to keep from leaking.…"

Rick Newman replied Feb 16, 2013 to Help with sealing checked plywood

11 Feb 17, 2013
Reply by Ken Shindledecker

"Ken, do you have any pictures? If so do you have them at the inside chine log? Can y…"

Rick Newman replied Feb 16, 2013 to Help with sealing checked plywood

11 Feb 17, 2013
Reply by Ken Shindledecker

"Dutch is PBR actually so strong it will remove paint? Doesn't it raise the grain? G…"

Rick Newman replied Feb 14, 2013 to Crenshaw Restore.

27 Nov 24, 2013
Reply by Adam "Dutch" Gottschling

"AJ, thanks for the reply! Will you be back on the OP again in April? Do you know any…"

Rick Newman replied Feb 12, 2013 to New Drift Boat Project

4 Feb 12, 2013
Reply by Rick Newman

"Mark, I once had a drift boat that need many more repairs than yours. When I inquirr…"

Rick Newman replied Feb 12, 2013 to New Drift Boat Project

4 Feb 12, 2013
Reply by Rick Newman

"Hello Guys, I did a search a while a go and found Onlinemetals.com where they had st…"

Rick Newman replied Feb 12, 2013 to Repairs and UHMW

6 Feb 12, 2013
Reply by Rick Newman

"Tom, check out this info that Herb Jacobsen posted a few years ago. No pictures but…"

Rick Newman replied Feb 10, 2013 to New drift boat project

10 Feb 10, 2013
Reply by Mark Heskett

"Tom, the purpose of the removable piece is to allow the boats to be stacked when tra…"

Rick Newman replied Feb 10, 2013 to New drift boat project

10 Feb 10, 2013
Reply by Mark Heskett

"Tungsten, in the search bar at the top right of the page type in Rick Newman, click…"

Rick Newman replied Feb 2, 2013 to Glue Seats Thwarts?

7 Feb 3, 2013
Reply by tungsten

"Ben, there is a "flap" of wood that rides on the same rail as the seat. It pivots fr…"

Rick Newman replied Feb 2, 2013 to Glue Seats Thwarts?

7 Feb 3, 2013
Reply by tungsten

RSS

© 2024   Created by Randy Dersham.   Powered by

Badges  |  Report an Issue  |  Terms of Service