tungsten's Discussions (370)

Search Forum

View

Discussions Replied To (364) Replies Latest Activity

"be sure the stain is fully dried/cured before you apply epoxy,this can take some tim…"

tungsten replied Jul 18, 2015 to Epoxy question

 6 Jul 18, 2015
Reply by Mel Buchanan

"I tested it a couple years ago,out gassing was a problem and when cured was brittle.…"

tungsten replied Jul 10, 2015 to Bottom Coating for Wooden Boats.

 7 Jul 25, 2015
Reply by Don Hanson

"Well theres probably a few on here that will say no to okume for the bottom but the…"

tungsten replied Jun 23, 2015 to Mike`s Framed Drift Boat Build

 315 Jun 23, 2016
Reply by Mike Thomas

"http://paryachts.blogspot.com.paryachts.com/p/blog-page_93.html     Mike,here's a li…"

tungsten replied Jun 18, 2015 to Mike`s Framed Drift Boat Build

 315 Jun 23, 2016
Reply by Mike Thomas

"Most common is 1/4" for the sides,3/8 is just overkill and no doubt would be hard to…"

tungsten replied Jun 17, 2015 to Mike`s Framed Drift Boat Build

 315 Jun 23, 2016
Reply by Mike Thomas

"Another option Phil is to cover the epoxy with a high solids epoxy paint,the ones I'…"

tungsten replied Jun 9, 2015 to Dorf's Wooden Drift Boat

 333 Jul 9, 2020
Reply by Phillip Westendorf

"I'd be worried that the bondo will eventually just crumble and let go.Hope you didn'…"

tungsten replied Jun 3, 2015 to Dorf's Wooden Drift Boat

 333 Jul 9, 2020
Reply by Phillip Westendorf

"Graphite mixed in epoxy doesn't make it any more durable in fact most put too much i…"

tungsten replied Jun 3, 2015 to Dorf's Wooden Drift Boat

 333 Jul 9, 2020
Reply by Phillip Westendorf

"With the glass at the chines the only way would be to glue them on with something th…"

tungsten replied May 11, 2015 to Bumper Rail Installation

 7 May 14, 2015
Reply by Phillip Westendorf

"Al,great job on the boat.The durabak easily will sand off with 80 paper,use thickene…"

tungsten replied Apr 18, 2015 to Looking for help with anchor system

 10 Apr 19, 2015
Reply by Al Strom

RSS

© 2025   Created by Randy Dersham.   Powered by

Badges  |  Report an Issue  |  Terms of Service