Don Hanson's Discussions (160)

Search Forum

View

Discussions Replied To (142) Replies Latest Activity

"The snowpack in the mountains stands at about 190% of normal and a flood of unprecid…"

Don Hanson replied May 23, 2011 to 11th Annual Snake River Wooden Boat Show

 12 May 31, 2011
Reply by Randy Dersham

"  During my recent Don Hill 16-footer refurbishment project,  I found no traces of a…"

Don Hanson replied May 23, 2011 to Ring nails vs screws II

 17 May 23, 2011
Reply by AJ DeRosa

"Doesn't anyone building drifters use bedding compound on screws?  I haven't seen it…"

Don Hanson replied May 21, 2011 to Ring nails vs screws II

 17 May 23, 2011
Reply by AJ DeRosa

"Sorry for the double post. I should have included that I'll do a more detailed write…"

Don Hanson replied May 17, 2011 to Finished up a Don Hill refurbish project

 2 Jun 30, 2011
Reply by David Bristow

"  I built my first 'big' boat there, too...or most of it.   A 22' cold molded cedar…"

Don Hanson replied May 15, 2011 to Jackson Lake Launch

 4 May 15, 2011
Reply by Don Hanson

"  I tried Dynel on a boat once.  It is tough to use with Epoxy.  It doesn't wet out…"

Don Hanson replied May 15, 2011 to Dynel/Fiberglass

 5 May 18, 2011
Reply by Lawrence E. Long

"  They make a clip that snaps onto an architect's scale (those triangular rules with…"

Don Hanson replied May 10, 2011 to 1-1/2" - 1' ruler?

 12 May 11, 2011
Reply by Seamus Walsh

"  Hey, how about that stuff they sell as "garage floor paint"..a two part epoxy fini…"

Don Hanson replied May 10, 2011 to 1/2" Sufficient for floor boards?

 10 May 11, 2011
Reply by chris towles

"It is nasty to work.  I trimmed a house with it last fall and I got wheezing pretty…"

Don Hanson replied May 9, 2011 to ipe wood

 4 May 11, 2011
Reply by Charles Ray Heater

"Suggestion:  Be sure you can get under the floorboard, however you 'lay them out'. …"

Don Hanson replied May 9, 2011 to 1/2" Sufficient for floor boards?

 10 May 11, 2011
Reply by chris towles

RSS

© 2024   Created by Randy Dersham.   Powered by

Badges  |  Report an Issue  |  Terms of Service