Rick Newman's Discussions (1,608)

Search Forum

View

Discussions Replied To (1577) Replies Latest Activity

"In my opinion frames should be made from a light, strong wood like the Port Orford C…"

Rick Newman replied Aug 9, 2011 to Newbie Questions

 5 Aug 11, 2011
Reply by John Greenleaf

"Before I spent the money on the plans I would read Roger Fletcher's "Drift Boats and…"

Rick Newman replied Aug 3, 2011 to Meranti vs okoume?

 11 Aug 9, 2011
Reply by mlwebb

"I am applying my paint and oil while the wood is laying horizontal. No drips, no run…"

Rick Newman replied Jul 28, 2011 to First Boat! Many Questions

 15 Jul 29, 2011
Reply by Ron Bakken

"Epoxy would seal the wood in a general sense, however several issues occur as the bo…"

Rick Newman replied Jul 28, 2011 to First Boat! Many Questions

 15 Jul 29, 2011
Reply by Ron Bakken

"The major purpose for a sealant/adhesive between the frames and plywood skin is to s…"

Rick Newman replied Jul 28, 2011 to First Boat! Many Questions

 15 Jul 29, 2011
Reply by Ron Bakken

"I don't know if Ultraply is the same as the plywood that Don Hanson recently tested.…"

Rick Newman replied Jul 22, 2011 to Thoughts on pressure treated wood...

 11 Jul 22, 2011
Reply by Frank R

"The pressure treatment is essentially skin deep. So if you machine or cut the wood y…"

Rick Newman replied Jul 21, 2011 to Thoughts on pressure treated wood...

 11 Jul 22, 2011
Reply by Frank R

"Past experiences from user of the shoes suggest that it won't happen. Where has the…"

Rick Newman replied Jul 20, 2011 to Lost my UHMW bottom

 13 Oct 10, 2013
Reply by Duane Doran

"Have you flipped your boat over to study the condition of the bottom, look for ruste…"

Rick Newman replied Jul 16, 2011 to Lost my UHMW bottom

 13 Oct 10, 2013
Reply by Duane Doran

"Bert, AJ DeRosa, Kevin and Dutch have had to do similar repairs to several boats. Th…"

Rick Newman replied Jul 13, 2011 to chine rot issue

 3 Jul 14, 2011
Reply by Bert

RSS

© 2024   Created by Randy Dersham.   Powered by

Badges  |  Report an Issue  |  Terms of Service