David Witton's Discussions (241)

Search Forum

View

Discussions Replied To (235) Replies Latest Activity

"Rick - Thanks for jumping in. Check out status.ning.com - apparently they're not awa…"

David Witton replied Apr 10, 2016 to Website issues?

 24 Apr 14, 2016
Reply by Rick Newman

"Based on the replies, I tried a tracert from my home. Here are the results: =======…"

David Witton replied Apr 9, 2016 to Website issues?

 24 Apr 14, 2016
Reply by Rick Newman

"I'm camping in the area Friday night - I hear there's no barbecue this year ;-(... W…"

David Witton replied Apr 5, 2016 to 16' Double ender w/ transom

 181 Jul 26, 2021
Reply by David Witton

"Dorf - Thanks for the detailed reply. Re Chris's comment above, I was worried about…"

David Witton replied Apr 5, 2016 to 16' Double ender w/ transom

 181 Jul 26, 2021
Reply by David Witton

"Your setup is way more bomber than mine - I tapped a single 1/4x20 hole and managed…"

David Witton replied Apr 4, 2016 to 16' Double ender w/ transom

 181 Jul 26, 2021
Reply by David Witton

"Good idea - that would also help with the tongue weight. "

David Witton replied Apr 4, 2016 to 16' Double ender w/ transom

 181 Jul 26, 2021
Reply by David Witton

"There are little tabs on the trailer at the chine level But they only engage a very…"

David Witton replied Apr 3, 2016 to 16' Double ender w/ transom

 181 Jul 26, 2021
Reply by David Witton

"Well, yesterday was the big day and everything went pretty much according to plan.…"

David Witton replied Apr 3, 2016 to 16' Double ender w/ transom

 181 Jul 26, 2021
Reply by David Witton

"My approach was to use half of a foam roller. Saturate it with epoxy, keep it wet,  …"

David Witton replied Apr 2, 2016 to Starting a Steele 16 drift boat restoration

 54 Jul 17, 2016
Reply by Kirk Miller

"I used four layers, each one a hair over 1/8" for a total of 5/8". Bent to a 68" rad…"

David Witton replied Mar 28, 2016 to 16' Double ender w/ transom

 181 Jul 26, 2021
Reply by David Witton

RSS

© 2025   Created by Randy Dersham.   Powered by

Badges  |  Report an Issue  |  Terms of Service