Randy Dersham's Discussions (571)

Discussions Replied To (537) Replies Latest Activity

"Greg, there is no right or wrong to the transom.  It could be as thin as a stem or a…"

Randy Dersham replied Jan 17, 2012 to Transom size vs rocker angle

5 Jan 18, 2012
Reply by Greg Jensen

"Guy, here is my opinion. The size you mention is very close to the most popular size…"

Randy Dersham replied Jan 17, 2012 to Guy's Wooden Drift Boat Project

1039 Nov 18, 2023
Reply by Guy Fredrickson

"Guy, I don't believe that stitch and glue will produce a lighter boat if you compare…"

Randy Dersham replied Jan 11, 2012 to Guy's Wooden Drift Boat Project

1039 Nov 18, 2023
Reply by Guy Fredrickson

"I agree with this Dave.  That is the way we build also."

Randy Dersham replied Jan 9, 2012 to Guy's Wooden Drift Boat Project

1039 Nov 18, 2023
Reply by Guy Fredrickson

"hahahaahahahahahahaah,     makes me smile!  Love it."

Randy Dersham replied Jan 8, 2012 to snowtrout

2 Jan 8, 2012
Reply by Adam "Dutch" Gottschling

"It sounds like you are ready to roll Guy.  Best of luck and post often. Give World P…"

Randy Dersham replied Jan 7, 2012 to Guy's Wooden Drift Boat Project

1039 Nov 18, 2023
Reply by Guy Fredrickson

"UHMW is Ultra High Molecular Weight plastic.  It can be purchased at most industrial…"

Randy Dersham replied Dec 27, 2011 to Chime replacement or repair on Chrenshaw Douglas Fir driftboat

24 Jan 6, 2012
Reply by John Greenleaf

"Very nice Roger.  Fine work and great memories."

Randy Dersham replied Dec 22, 2011 to Funny looking drift boat

8 Dec 23, 2011
Reply by Greg Hatten

"Hello Robert.  We are going through some changes. You can reach me here, or at randy…"

Randy Dersham replied Dec 20, 2011 to Tatman Boats site

2 Dec 20, 2011
Reply by Randy Dersham

"Brad it's been great following the Boop's reconstruction.  Great Job! I have had the…"

Randy Dersham replied Dec 12, 2011 to Resin Research 2040

14 Dec 12, 2011
Reply by Brad Dimock

RSS

© 2024   Created by Randy Dersham.   Powered by

Badges  |  Report an Issue  |  Terms of Service