Phillip Westendorf's Discussions (644)

Search Forum

View

Discussions Replied To (638) Replies Latest Activity

"Mike, I have 1/2" Oarlocks.  They seem to be adequate for our rivers.  Not too much…"

Phillip Westendorf replied Jan 1, 2016 to Mike`s Framed Drift Boat Build

 315 Jun 23, 2016
Reply by Mike Thomas

"Mike, Wishing you a Merry Christmas! Boat is looking mighty fine too. Dorf"

Phillip Westendorf replied Dec 25, 2015 to Mike`s Framed Drift Boat Build

 315 Jun 23, 2016
Reply by Mike Thomas

"Mike, Here's a pic of the 3/4" galvanized pipe I used for the seat supports.  It's 3…"

Phillip Westendorf replied Dec 17, 2015 to Mike`s Framed Drift Boat Build

 315 Jun 23, 2016
Reply by Mike Thomas

"Here's the boat ready for Winter storage.  Got to get ready for Winter's Ice Fishing…"

Phillip Westendorf replied Dec 17, 2015 to Dorf's Wooden Drift Boat

 333 Jul 9, 2020
Reply by Phillip Westendorf

"Josh, A word of caution from my personal experience.  The three inline fishermen as…"

Phillip Westendorf replied Dec 17, 2015 to Don Hill 17FF drift boat

 5 Dec 24, 2015
Reply by Josh Trammell

"Alan, The stripping over frame is very doable, in my opinion.  There's a guy here in…"

Phillip Westendorf replied Dec 11, 2015 to Plywood Strips for Building

 8 Dec 12, 2015
Reply by alan wernstrum

"Alan, Stripping a framed hull is a lot more time consuming than plywood panels.  You…"

Phillip Westendorf replied Dec 10, 2015 to Plywood Strips for Building

 8 Dec 12, 2015
Reply by alan wernstrum

"Mike, The floor boards in my boat are Oiled.  No epoxy or varnish or sand.  As Mike…"

Phillip Westendorf replied Dec 9, 2015 to Mike`s Framed Drift Boat Build

 315 Jun 23, 2016
Reply by Mike Thomas

"Mike, Check out Epifanes newer Varnish that doesn't require sanding between coats. J…"

Phillip Westendorf replied Dec 8, 2015 to Mike`s Framed Drift Boat Build

 315 Jun 23, 2016
Reply by Mike Thomas

"Brett, You'll have to dig out the broken pieces with a burr in a Dremel tool or dig…"

Phillip Westendorf replied Nov 24, 2015 to new to posting on site

 14 Nov 25, 2015
Reply by brett wolfe

RSS

© 2024   Created by Randy Dersham.   Powered by

Badges  |  Report an Issue  |  Terms of Service