Randy Dersham's Discussions (571)

Discussions Replied To (537) Replies Latest Activity

"David this is my fault. For a time I had a video section on this site.  Most people…"

Randy Dersham replied Nov 16, 2011 to Bigger Net - Better Reel

9 Nov 22, 2011
Reply by Jason Knight

"Rock On Kelly. That is inspirational and very well done.  Wonderful, wonderful, wond…"

Randy Dersham replied Nov 10, 2011 to 2x4s for frames...will it work?

31 Nov 10, 2011
Reply by Randy Dersham

"It is common and acceptable to scarf two shorter pieces.  Make a taper jig for your…"

Randy Dersham replied Nov 10, 2011 to CHINE WOOD

9 Nov 13, 2011
Reply by Jon grannis

"GelMagic is fantastic as a glue.  For scarf joints you should wet the scarf with a n…"

Randy Dersham replied Nov 10, 2011 to Help - System 3 Silver Tip epoxy

7 Dec 28, 2011
Reply by Greg Jensen

"Yup, that's a great reproduction. The canyon plans had the lower splash guard like t…"

Randy Dersham replied Oct 27, 2011 to Rogue River Seven

18 Oct 28, 2011
Reply by Greg Hatten

"That's right Larry, The original was white with a green stripe.  The front inside of…"

Randy Dersham replied Oct 26, 2011 to Rogue River Seven

18 Oct 28, 2011
Reply by Greg Hatten

"Hello Ken, I own Tatman boats. You can give me a call at 541-285-3676"

Randy Dersham replied Sep 23, 2011 to Tatman boat - replacement components

2 Oct 3, 2011
Reply by Ken Suttorp

"Greg is a member of WBP and is online from time to time.  Chime in Greg if your watc…"

Randy Dersham replied Sep 12, 2011 to Remove chines, save the rest

14 Nov 25, 2011
Reply by Ray Cotnoir

"I don't have a lot of personal experience; however, I was at the System Three factor…"

Randy Dersham replied Sep 11, 2011 to Penetrating Epoxies

7 Apr 28, 2012
Reply by Don Hanson

"Very interesting.  Well you have a unique boat.   It sounds like the bottom is going…"

Randy Dersham replied Sep 7, 2011 to bottom removal question

11 Sep 11, 2011
Reply by Chase Pritchett

RSS

© 2024   Created by Randy Dersham.   Powered by

Badges  |  Report an Issue  |  Terms of Service