tungsten's Discussions (373)

Search Forum

View

Discussions Replied To (367) Replies Latest Activity

"Very nice!!  What's the max angle/flare on the sides?---somewhere around 30 in the m…"

tungsten replied Nov 4, 2013 to Pram Design Help Wanted/Needed!

 77 Nov 16, 2013
Reply by Ken Shindledecker

"This was my second boat,would work well for what you want.11'3 loa http://imageshack…"

tungsten replied Nov 4, 2013 to Pram Design Help Wanted/Needed!

 77 Nov 16, 2013
Reply by Ken Shindledecker

"I've built two similar boats,one the Hudson that you showed and one of my own design…"

tungsten replied Nov 3, 2013 to Pram Design Help Wanted/Needed!

 77 Nov 16, 2013
Reply by Ken Shindledecker

"Nice job on the boat,I wonder how this motor will perform on that type of hull?"

tungsten replied Nov 2, 2013 to Z's Drifter Pram

 62 Mar 9, 2017
Reply by Bennett Yarbrough

"X2 on the blush and out gassing.Hard to do this out side with the big temp swings.Tr…"

tungsten replied Oct 26, 2013 to Fiberglassed Bottom - What have I done ...?

 9 Jul 29, 2014
Reply by wingless

"If you can get a hold of some 2x4's then you could build an A frame then cover with…"

tungsten replied Oct 8, 2013 to Storing a wood boat

 3 Oct 8, 2013
Reply by tungsten

"Since were asking questions,is the yellowish fabric Kevlar?"

tungsten replied Oct 3, 2013 to A few questions about wood vs. foam

 19 Oct 3, 2013
Reply by lhedrick

"Yes of course.No big scary objects to row away from where I'm from.   Good luck with…"

tungsten replied Sep 30, 2013 to A few questions about wood vs. foam

 19 Oct 3, 2013
Reply by lhedrick

"My guess is the holes in the chines happened because there wasn't enough glass there…"

tungsten replied Sep 30, 2013 to A few questions about wood vs. foam

 19 Oct 3, 2013
Reply by lhedrick

"Never tried cutting Kevlar in epoxy but a jig saw can be beveled to match, and blade…"

tungsten replied Sep 21, 2013 to Trimming the hull to shape

 5 Sep 21, 2013
Reply by chris towles

RSS

© 2025   Created by Randy Dersham.   Powered by

Badges  |  Report an Issue  |  Terms of Service