Lawrence E. Long's Discussions (324)

Search Forum

View

Discussions Replied To (320) Replies Latest Activity

"Jack:You might consider brass half oval solidstock moulding.  I used it on the stems…"

Lawrence E. Long replied Mar 23, 2012 to Stainless Rub Rail?

 10 Mar 24, 2012
Reply by Jack Rose

"Mahog:  Whats with the spinning reel in the bed of the truck? Do you have any nightc…"

Lawrence E. Long replied Mar 20, 2012 to Stem Material?

 23 Mar 26, 2012
Reply by Michael Rosso

"Rick: Finished  #9 varnish coat.  One more to go.    I have been using Pettit Captai…"

Lawrence E. Long replied Mar 20, 2012 to plywood

 11 Mar 20, 2012
Reply by Rick Newman

"Rick:  The Peapod needs 2 more coats of varnish on breasthooks,gunwales fore and aft…"

Lawrence E. Long replied Mar 20, 2012 to plywood

 11 Mar 20, 2012
Reply by Rick Newman

"Thomas:  One thing you could do is overlay the 7/16"  with a layer of !/14"  I did t…"

Lawrence E. Long replied Mar 19, 2012 to plywood

 11 Mar 20, 2012
Reply by Rick Newman

"Thomas:  check the PW before hand- must have 5 plys and no voids.  I have seen "mari…"

Lawrence E. Long replied Mar 19, 2012 to plywood

 11 Mar 20, 2012
Reply by Rick Newman

"I used it to bed/bond the half oval brass strip ( as well as screws on 3" centers) o…"

Lawrence E. Long replied Mar 7, 2012 to 3m 5200.. info needed!

 16 Jun 27, 2012
Reply by Mark

"Jonathan:  The  framed boat is more difficult to build.  Compound bevels on frames.i…"

Lawrence E. Long replied Feb 26, 2012 to Stitch and glue drift boats

 15 Feb 29, 2012
Reply by Dave Tishler

"Gary:   Here in Maine  northern white cedar is good.  I was thinking in the west Ala…"

Lawrence E. Long replied Feb 25, 2012 to Driftboat Construction

 17 Mar 13, 2012
Reply by Phillip Westendorf

"Gary:  I am no expert-all of my boats and canoes have been built with PW. The one DB…"

Lawrence E. Long replied Feb 25, 2012 to Driftboat Construction

 17 Mar 13, 2012
Reply by Phillip Westendorf

RSS

© 2024   Created by Randy Dersham.   Powered by

Badges  |  Report an Issue  |  Terms of Service