David Witton's Discussions (243)

Search Forum

View

Discussions Replied To (237) Replies Latest Activity

"A guy I respect told me that the glass to resin ratio was 1:1 - that is, if your clo…"

David Witton replied Dec 22, 2015 to fiberglassing sides and bottom

 13 Dec 23, 2015
Reply by Mike Thomas

"Mike Nice clean work on the details - you've got a good looking boat there!"

David Witton replied Dec 21, 2015 to Mike`s Framed Drift Boat Build

 315 Jun 23, 2016
Reply by Mike Thomas

"Well, the chine caps are on - it was a bit of a wrestling match. They're 2 1/4" wide…"

David Witton replied Dec 17, 2015 to 16' Double ender w/ transom

 181 Jul 26, 2021
Reply by David Witton

"They do - and unlike the frames, they sit WAY off the vertical, so you need to take…"

David Witton replied Dec 16, 2015 to Chine Notch Questions

 4 Jan 18, 2016
Reply by Brad Dimock

"Mike The bottom consists of four layers of material - first, 1/4" meranti plywood sc…"

David Witton replied Dec 15, 2015 to 16' Double ender w/ transom

 181 Jul 26, 2021
Reply by David Witton

"I should have been more clear - I had planned to coat them with epoxy to seal them,…"

David Witton replied Dec 13, 2015 to 16' Double ender w/ transom

 181 Jul 26, 2021
Reply by David Witton

"I"m at the point where I'm doing a first install of the chine caps - I'll take them…"

David Witton replied Dec 13, 2015 to 16' Double ender w/ transom

 181 Jul 26, 2021
Reply by David Witton

"That detail is an oversized Federalist banding - I just cut out a whole bunch of dia…"

David Witton replied Dec 13, 2015 to 16' Double ender w/ transom

 181 Jul 26, 2021
Reply by David Witton

"This is  my first boat, so I'm learning all sort of things - like how the build goes…"

David Witton replied Dec 12, 2015 to 16' Double ender w/ transom

 181 Jul 26, 2021
Reply by David Witton

"Mike - Aside from tipping with a foam brush, do you worry about bubbles? What do you…"

David Witton replied Dec 6, 2015 to 16' Double ender w/ transom

 181 Jul 26, 2021
Reply by David Witton

RSS

© 2025   Created by Randy Dersham.   Powered by

Badges  |  Report an Issue  |  Terms of Service