chris towles's Discussions (219)

Discussions Replied To (202) Replies Latest Activity

"This topic comes up all the time, and i am in the camp of dont try to make that boat…"

chris towles replied Aug 5, 2016 to Whitewater Dory vs. Fishing Dory

14 Aug 21, 2016
Reply by Mark Jones

"No. Oil and epoxy don't mix. I would glass the bottom. Mabye the sides too outside.…"

chris towles replied Aug 2, 2016 to 14' Don Hill Drift Boat Restoration

29 Aug 10, 2018
Reply by Guy Fredrickson

"If the wood is decent, i might think about goung the teak oil route, and only epoxy…"

chris towles replied Aug 1, 2016 to 14' Don Hill Drift Boat Restoration

29 Aug 10, 2018
Reply by Guy Fredrickson

"If you capsize the boat, you are gonna have way bigger problems than removable floor…"

chris towles replied Jul 10, 2016 to first time out in a drift boat and floor question

7 Jul 12, 2016
Reply by Mike Thomas

"That sounds like a pretty good plan to me. Depending on how big the gap between the…"

chris towles replied May 27, 2016 to Mike`s Framed Drift Boat Build

315 Jun 23, 2016
Reply by Mike Thomas

"I'll save you some time and heartache. Those sliding barrel bolts will be a pain in…"

chris towles replied May 26, 2016 to Mike`s Framed Drift Boat Build

315 Jun 23, 2016
Reply by Mike Thomas

"That's a cool imprint of the trailer lights on the garage floor. Looks like one of t…"

chris towles replied May 26, 2016 to Mike`s Framed Drift Boat Build

315 Jun 23, 2016
Reply by Mike Thomas

"I'm with the 16" too crowd. My last boat was a 16x48 Mackenzie and that seemed to be…"

chris towles replied May 26, 2016 to Rower seat height?

6 May 27, 2016
Reply by Mark Stuberr

"Have fun, wish I could make it. Last minute high water Idaho trip has got me again.…"

chris towles replied May 26, 2016 to 16th Annual Snake River Wooden Boat Show

1 May 26, 2016
Reply by chris towles

"Ouch, looks like you swam almost all the way down to the gems. Last trip a buddy and…"

chris towles replied May 21, 2016 to Grand Canyon Dory Run

7 May 27, 2016
Reply by carlo

RSS

© 2024   Created by Randy Dersham.   Powered by

Badges  |  Report an Issue  |  Terms of Service