Phillip Westendorf's Discussions (644)

Search Forum

View

Discussions Replied To (638) Replies Latest Activity

"CW. When you get around to removing the chine logs and transom trim, etc.  This vide…"

Phillip Westendorf replied Aug 12, 2015 to Rub Strip Removal

 14 Aug 12, 2015
Reply by CWarmouth

"MW, Take a look at the oarlocks on my DB. Blow up the picture and you can see it bet…"

Phillip Westendorf replied Aug 12, 2015 to adjustable oarlock mounts

 11 Aug 15, 2015
Reply by chris towles

"Marty, The simple answer is most of us who have built a drift boat have made them, e…"

Phillip Westendorf replied Aug 11, 2015 to adjustable oarlock mounts

 11 Aug 15, 2015
Reply by chris towles

"CW, First things first, you'll need to determine if it's glued to the sides.  Use a…"

Phillip Westendorf replied Aug 11, 2015 to Rub Strip Removal

 14 Aug 12, 2015
Reply by CWarmouth

"Mike, What you are proposing, mounting the bottom before glassing the sides will wor…"

Phillip Westendorf replied Aug 10, 2015 to Mike`s Framed Drift Boat Build

 315 Jun 23, 2016
Reply by Mike Thomas

"Mike, I put a small radius on the front piece, about 3/16" R,  You can leave it flat…"

Phillip Westendorf replied Aug 10, 2015 to Mike`s Framed Drift Boat Build

 315 Jun 23, 2016
Reply by Mike Thomas

"CW, Assuming the rub strip is plywood try using a sharp wood chisel with a mallot an…"

Phillip Westendorf replied Aug 10, 2015 to Rub Strip Removal

 14 Aug 12, 2015
Reply by CWarmouth

"Mike, Lookin real good!  Question, are you planning a cap on the stem to cover the o…"

Phillip Westendorf replied Aug 9, 2015 to Mike`s Framed Drift Boat Build

 315 Jun 23, 2016
Reply by Mike Thomas

"Mel, If you look at my post on page 15 there is a picture of the winch stand I made.…"

Phillip Westendorf replied Aug 9, 2015 to Trailer Drawings

 118 Jul 13, 2019
Reply by Bennett Yarbrough

"Mike, Thickened epoxy! Dorf"

Phillip Westendorf replied Aug 4, 2015 to Mike`s Framed Drift Boat Build

 315 Jun 23, 2016
Reply by Mike Thomas

RSS

© 2024   Created by Randy Dersham.   Powered by

Badges  |  Report an Issue  |  Terms of Service