Rub Strip Removal

Looking for some advice on how to the rub strip from my Keith Steele boat. It looks to be nailed on. It is coated with a lot of paint so I dont know if I should expect to encounter screws as well. I briefly tried to tap a screwdriver behind the rub strip to pry it but the wood on this boat is so, so dry that I was sure I would damage it badly if I forced it. Any thoughts?

Views: 573

▶ Reply to This

Replies to This Discussion

Permalink Reply by Phillip Westendorf on August 12, 2015 at 6:33pm

CW.

When you get around to removing the chine logs and transom trim, etc.  This video will help you get the screws out.  Louis Sauzedde is a real oldtime shipwright and has a lot of videos out there worth looking at. Here's one on a simple method of removing screws in planks.

 https://www.youtube.com/watch?v=tb-VXCGVq2Y

Have fun,

Dorf

Permalink Reply by CWarmouth on August 12, 2015 at 10:41pm

Interesting video. I liked the tips for the screw removal. Thanks.

RSS

© 2024   Created by Randy Dersham.   Powered by

Badges  |  Report an Issue  |  Terms of Service