Randy Dersham's Discussions (571)

Discussions Replied To (537) Replies Latest Activity

"Don is unfortunately not healthy enough to answer your questions but I think if you…"

Randy Dersham replied Apr 4, 2011 to Plywood Scarfs and How Many Sheets

9 Apr 7, 2011
Reply by Randy Dersham

"I'm with you Brad. In the long run that method is just a bad idea.  It sure is beaut…"

Randy Dersham replied Mar 29, 2011 to Copper chines

5 Mar 29, 2011
Reply by Brad Dimock

"Yes, Jason.  It is the same as when you were between coats during the build.  Sand t…"

Randy Dersham replied Mar 25, 2011 to Flow Coat Question

11 Apr 26, 2011
Reply by Robert Puckett

"There are a couple of things to think about Ben. 1. plywood will not breath and dry…"

Randy Dersham replied Mar 23, 2011 to Best Decking Wood

9 Mar 24, 2011
Reply by chris towles

"Mike this is a great write up and wonderful advice. You also have much more experien…"

Randy Dersham replied Mar 22, 2011 to Rogue River Beta

11 May 23, 2011
Reply by mark hilbert

"The only real reason I use nails on the side is because they are so pretty.  I screw…"

Randy Dersham replied Mar 10, 2011 to Screw Distance

26 Mar 19, 2011
Reply by chris towles

"Dave, what do you mean that framed boats are an approximation?  I'd like to understa…"

Randy Dersham replied Mar 9, 2011 to Panel Dimensions??? HELP?

9 Mar 10, 2011
Reply by Don Wakefield

"From the photos on your blog it is obvious that you are doing great and the boat is…"

Randy Dersham replied Mar 7, 2011 to Screw Distance

26 Mar 19, 2011
Reply by chris towles

"I was only talking about the frames.  I forgot you were going to make compartments. …"

Randy Dersham replied Mar 7, 2011 to Screw Distance

26 Mar 19, 2011
Reply by chris towles

"The governing decision is that Ben wants to oil, rather than paint, the interior of…"

Randy Dersham replied Mar 7, 2011 to Screw Distance

26 Mar 19, 2011
Reply by chris towles

RSS

© 2024   Created by Randy Dersham.   Powered by

Badges  |  Report an Issue  |  Terms of Service