Jason Knight's Discussions (472)

Search Forum

View

Discussions Replied To (410) Replies Latest Activity

"I used the Gel Magic where the frames and sides meet, along with ring nails. I used…"

Jason Knight replied May 10, 2009 to 5200 or Gel Magic?

 7 May 17, 2009
Reply by Randy Dersham

"Agreed. I think the key word would be "compromise". No one boat does everything... s…"

Jason Knight replied May 8, 2009 to Draft

 20 May 8, 2009
Reply by Mike Dearing

"Kurt, Here is the link to the site - not sure if they fully explain the material, bu…"

Jason Knight replied May 8, 2009 to Screws vs. Ring Nails

 17 May 10, 2009
Reply by Randy Dersham

"Hmmm, I wonder material they use for the back side then... Quote from website: "All…"

Jason Knight replied May 7, 2009 to Screws vs. Ring Nails

 17 May 10, 2009
Reply by Randy Dersham

"Kurt, There is a builder here in MI who was showing me a UHMW product that sounds li…"

Jason Knight replied May 7, 2009 to Screws vs. Ring Nails

 17 May 10, 2009
Reply by Randy Dersham

"my boat is 17'. I am surprised that two passengers up from gives you a hard time. Wh…"

Jason Knight replied May 7, 2009 to Draft

 20 May 8, 2009
Reply by Mike Dearing

"My boat is 52" wide"

Jason Knight replied May 6, 2009 to Draft

 20 May 8, 2009
Reply by Mike Dearing

"I basically decided on the shape for my boat based on what I gathered from asking ot…"

Jason Knight replied May 6, 2009 to Draft

 20 May 8, 2009
Reply by Mike Dearing

"We managed a few decent browns... I lost the only steel I hooked after a few seconds…"

Jason Knight replied Apr 27, 2009 to Check out this boat I saw...

 5 Apr 27, 2009
Reply by Brad

"Yes - we fished the PM upstream from the Sulak launch..."

Jason Knight replied Apr 22, 2009 to Check out this boat I saw...

 5 Apr 27, 2009
Reply by Brad

RSS

© 2024   Created by Randy Dersham.   Powered by

Badges  |  Report an Issue  |  Terms of Service